ADE-92MH Datasheet, PDF (1/3 Pages) Mini-Circuits – Frequency Mixer

Frequency Mixer
Level 13 (LO Power +13 dBm) 400 to 900 MHz
The Big Deal
• Excellent IP3: +26dBm with reduced
LO power (+13dBm)
• High LO-RF Isolation across the entire band
• Low cost, miniature size
ADE-92MH+
CASE STYLE: CD636
Product Overview
The ADE-92MH+ is passive double balanced mixer featuring a FET quad in a ring configuration providing high
dynamic range performance in a small, low cost, RoHS-compliant package. The ADE-92MH+ provides RF/LO
response from 400 to 900 MHz and IF response from DC to 150 MHz. It is especially useful in systems where cost
and performance are critical, such as GSM cellular system applications. This mixer is ideal for upconverter and
downconverter applications and does not require external matching components or DC power.
Key Features
Feature
Advantages
High IP3, +26 dBm typ. with reduced LO
power requirement.
Allows for improved dynamic range, a critical factor in receiver applications.
Low conversion loss, 7 dB typ.
Enables lower NF front ends, which can improve system sensitivity.
High LO to RF isolation, 40 dB typ.
Reduced levels of unwanted responses that can interfere with system
performance.
Broadband matching
The IF port VSWR is less than 1.6 to 1 over the specified frequency range, which
simplifies impedance matching with adjoining components.
Insensitive to LO power level variations
Allows the use of an LO amplifier with less stringent gain flatness, enabling the
use of lower cost amplifiers.
Small package
0.310” x 0.220” x 0.162”
Enables high density packaging.
Mini-Circuits^®
ISO 9001 ISO 14001 AS 9100 CERTIFIED
P.O. Box 350166, Brooklyn, New York 11235-0003 [phone] Fax [phone] The Design Engineers Search Engine
For detailed performance specs
& shopping online see web site
TM
Provides ACTUAL Data Instantly at minicircuits.com
IF/RF MICROWAVE COMPONENTS
Notes: 1. Performance and quality attributes and conditions not expressly stated in this specification sheet are intended to be excluded and do not form a part of this specification sheet. 2. Electrical specifications
and performance data contained herein are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. 3. The parts covered by this specification sheet are subject to
Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard
Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp.
Page 1 of 3