B1007-BD_09 Datasheet, PDF (8/9 Pages) Mimix Broadband – 4.0-11.0 GHz GaAs MMIC

4.0-11.0 GHz GaAs MMIC
Buffer Amplifier
October 2009 - Rev 10-Oct-09
B1007-BD
App Note [1] Biasing - The device provides variable gain with adjustable bias regulation. For optimum linearity performance, it is recommended
to bias this device at Vd=4V with Id=90 mA (Vg2 at approximately -0.5V and Vg1 left open). It is also recommended to use active biasing to control
the drain currents because this gives the most reproducible results over temperature or RF level variations. Depending on the supply voltage
available and the power dissipation constraints, the bias circuit may be a single transistor or a low power operational amplifier, with a low value
resistor in series with the drain supply used to sense the current. The gate of the pHEMT is controlled to maintain correct drain current and thus
drain voltage. The typical gate voltage needed to do this is -0.5V. Typically the gate is protected with Silicon diodes to limit the applied voltage. Also,
make sure to sequence the applied voltage to ensure negative gate bias is available before applying the positive drain supply.
App Note [2] Bias Arrangement - For Individual Stage Bias (Recommended for saturated applications) -- Each DC pad (Vd and Vg1,2) needs to
have DC bypass capacitance (~100-200 pF) as close to the device as possible. Additional DC bypass capacitance (~0.01 uF) is also recommended.
MTTF Graphs
These numbers were calculated based on accelerated life test information and thermal model analysis received from the fabricating foundry.
XB1007-BD: MTTF hours vs. Backside Temperature
1.0E+16
1.0E+15
1.0E+14
1.0E+13
Vdd = 4 V, Idd = 100 mA
Vdd = 4 V, Idd = 130 mA
1.0E+12
1.0E+11
1.0E+10
1.0E+09
1.0E+08
1.0E+07
1.0E+06
1.0E+05
1.0E+04
20 30 40 50 60 70 80 90 100 110 120
Backside Temp (ºC)
XB1007-BD: Tch (max) vs. Backside Temperature
220
200
180
160
140
120
100
80
Vdd = 4 V, Idd = 100 mA
60
Vdd = 4 V, Idd = 130 mA
40
20 30 40 50 60 70 80 90 100 110 120
Backside Temp (ºC)
Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099
Tel: [phone] Fax: [phone] mimixbroadband.com
Page 8 of 9
Characteristic Data and Specifications are subject to change without notice. ©2009 Mimix Broadband, Inc.
Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept
their obligation to be compliant with U.S. Export Laws.