English
Language : 

30DBL0537-QC Datasheet, PDF (5/5 Pages) Mimix Broadband – 14.0-17.0/28.0-34.0 GHz Active Doubler QFN, 5x5mm
14.0-17.0/28.0-34.0 GHz Active Doubler
QFN, 5x5mm
April 2006 - Rev 10-Apr-06
30DBL0537-QC
Handling and Assembly Information
CAUTION! - Mimix Broadband MMIC Products contain gallium arsenide (GaAs) which can be hazardous to the human
body and the environment. For safety, observe the following procedures:
Do not ingest.
Do not alter the form of this product into a gas, powder, or liquid through burning, crushing, or chemical
processing as these by-products are dangerous to the human body if inhaled, ingested, or swallowed.
Observe government laws and company regulations when discarding this product. This product must be
discarded in accordance with methods specified by applicable hazardous waste procedures.
Life Support Policy - Mimix Broadband's products are not authorized for use as critical components in life support
devices or systems without the express written approval of the President and General Counsel of Mimix Broadband. As
used herein: (1) Life support devices or systems are devices or systems which, (a) are intended for surgical implant into
the body, or (b) support or sustain life, and whose failure to perform when properly used in accordance with instructions
for use provided in the labeling, can be reasonably expected to result in a significant injury to the user. (2) A critical
component is any component of a life support device or system whose failure to perform can be reasonably expected
to cause the failure of the life support device or system, or to affect its safety or effectiveness.
Package Attachment - This packaged product from Mimix Broadband is provided as a rugged surface mount package
compatible with high volume solder installation. Vacuum tools or other suitable pick and place equipment may be used
to pick and place this part. Care should be taken to ensure that there are no voids or gaps in the solder connection so
that good RF, DC and ground connections are maintained. Voids or gaps can eventually lead not only to RF performance
degradation, but reduced reliability and life of the product due to
thermal stress.
Mimix Lead-Free RoHS Compliant Program - Mimix has an active program in place to meet customer and governmental
requirements for eliminating lead (Pb) and other environmentally hazardous materials from our products. All Mimix
RoHS compliant components are form, fit and functional replacements for their non-RoHS equivalents. Lead plating of
our RoHS compliant parts is 100% matt tin (Sn) over copper alloy and is backwards compatible with current standard
SnPb low-temperature reflow processes as well as higher temperature (260°C reflow) “Pb Free” processes.
Part Number for Ordering
30DBL0537-QC-0N00
30DBL0537-QC-0N0T
PB- 30DBL0537-QC
Description
Ni/Cu plated RoHS compliant QFN 5x5 32L surface mount package in bulk quantity
Ni/Cu plated RoHS compliant QFN 5x5 32L surface mount package in tape and reel
30DBL0537-QC Evaluation Board
We also offer this part with alternative plating options. Please contact your regional sales manager for more information
regarding different plating types.
Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099
Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com
Page 5 of 5
Characteristic Data and Specifications are subject to change without notice. ©2006 Mimix Broadband, Inc.
Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept
their obligation to be compliant with U.S. Export Laws.