CMM1110-BD_0705 Datasheet, PDF (4/6 Pages) Mimix Broadband – 2.0-18.0 GHz GaAs MMIC Low Noise Amplifier

2.0-18.0 GHz GaAs MMIC
Low Noise Amplifier
May 2007 - Rev 01-May-07
Mechanical Drawing
0.091
(0.036)
1.100
(0.043)
1.009
2
(0.040)
0.949
(0.037)
3
CMM1110-BD
1.908
(0.075)
4
0.520
1
(0.021)
5
0.520
(0.021)
0.0
0.0
14 13 12 11
10 9 8 7 6
0.660 0.869
(0.026) (0.034)
0.759 0.979
(0.030) (0.039)
1.688 1.908
(0.067) (0.075)
1.383 1.600 1.798 2.000
(0.054) (0.063)(0.071) (0.079)
(Note: Engineering designator is M420)
Units: millimeters (inches) Bond pad dimensions are shown to center of bond pad.
Thickness: 0.110 +/- 0.010 (0.0043 +/- 0.0004), Backside is ground, Bond Pad/Backside Metallization: Gold
All DC Bond Pads are 0.080 x 0.080 (0.003 x 0.003). All RF Bond Pads are 0.180 x 0.080 (0.007 x 0.003).
Bond pad centers are approximately 0.109 (0.004) from the edge of the chip.
Dicing tolerance: +/- 0.005 (+/- 0.0002). Approximate weight: 1.364 mg
Bond Pad #1 (RF In)
Bond Pad #2 (Vg1)
Bond Pad #3 (Vd1)
Bias Arrangement
Bond Pad #4 (Vd2)
Bond Pad #5 (RF Out)
Bond Pad #6 (Rs2-32 )
Bond Pad #7 (Rs2-20.0 ) Bond Pad #11 (Rs1-32 )
Bond Pad #8 (Rs2-15 )
Bond Pad #12 (Rs1-20 )
Bond Pad #9 (Rs2 - Off Chip) Bond Pad #13 (Rs1-15 )
Bond Pad #10 (Vg2)
Bond Pad #14 (Rs1 - Off Chip)
Vd1,2
Bypass Capacitors - See App Note [2]
2
3
4
RF In ₁
5 RF Out
14 13 12 11
10 9 8 7 6
Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099
Tel: [phone] Fax: [phone] mimixbroadband.com
Page 4 of 6
Characteristic Data and Specifications are subject to change without notice. ©2007 Mimix Broadband, Inc.
Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept
their obligation to be compliant with U.S. Export Laws.