CMM1434-SM Datasheet, PDF (3/3 Pages) Mimix Broadband – 13.50-14.50 GHz 2.5-Watt Power Amplifier

13.50-14.50 GHz
2.5-Watt Power Amplifier
March 2006 - Rev 02-Mar-06
CMM1434-SM
Physical Dimensions (Bottom View)
R_Noe_te:c_To_hism_schm_emae_ticn_red_pe_resd_enA_{ts th}p_ep_tol_pi_oc_loa_gyt_oio_{f th}n_{e a}C_ppli_icr_ac_tiou_ni_ct_ircuit
recommended by Celeritek.
Vdd
Vdd
RF IN
Vgg
50
0.1 F
1
10
2
9
50
3
8
4
7
5
6
0.1 F
RF OUT
Vgg
Note: Due to the high gain of this device it is highly recommended to maintain the
reverse isolation (S12) above 50 dB.
Biasing Notes
1. Dual bias is required
2. 0.1 F bypass capacitors are needed on PC board as close as possible to pins
1, 5, 6 and 10.
3. Positive (+) bias can be applied either at pin 1 or pin 6.
4. Negative (-) bias can be applied either at pin 5 or pin 6.
5. No DC block is required at RF IN/OUT.
6. Negative (-) bias must be applied before applying positive (+) bias.
Pin Functional Diagram
Vdd 1
10 Vdd
GROUND 2
9 GROUND
RF IN 3
8 RF OUT
GROUND 4
7 GROUND
Vgg 5
6 Vgg
Ordering Information
The CMM1434-SM is available in available in tube or tape and reel.
Part Number for Ordering
Package
C M M 1431-SM
Sur face mount package
PB-CMM1434-SM
Evaluation Board
Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099
Tel: [phone] Fax: [phone] mimixbroadband.com
Page 3 of 3
Characteristic Data and Specifications are subject to change without notice. ©2006 Mimix Broadband, Inc.
Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept
their obligation to be compliant with U.S. Export Laws.