CMM2030-BD Datasheet, PDF (2/4 Pages) Mimix Broadband – 30 kHz-30 GHz GaAs MMIC Optical Modulator Driver Amplifier

30 kHz-30 GHz GaAs MMIC
Optical Modulator Driver Amplifier
August 2006 - Rev 02-Aug-06
CMM2030-BD
Absolute Maximum Ratings
Parameter
Rating
Drain Voltage
Gate Voltage
Drain Current
Continuous Power Dissipation
Channel Temperature
Storage Temperature
Mounting Temperature
Input Power
12 V
-5 V
375 mA
3.0 W
+175°C
-65°C to +175°C
+320°C
+23 dBm
Die Attach and Bonding Procedures
Die Attach: Eutectic die attach is recommended. For eutec-
tic die attach: Preform: AuSn (80% Au, 20% Sn); Stage
Temperature: 290°C, ±5°C; Handling Tool: Tweezers; Time: 1
min or less.
Wire Bonding: Wire Size: 0.7 to 1.0 mil in diameter (pre-
stressed); Thermocompression bonding is preferred over
thermosonic bonding. For thermocompression bonding:
Stage Temperature: 250°C; Bond Tip Temperature: 150°C;
Bonding Tip Pressure: 18 to 40 gms depending on size of
wire.
Typical Performance
P1dB vs Frequency
Performance Optimization
Using the Gain-Ctl facility of the CMM2030-BD, out-
put power may be increased by application of 1.2 to 1.8 Volts
to the Bias Control pad. If the Gain-Ctl facility is not used, a
fixed voltage at the Bias Control pad can be implemented by
connecting a off-chip parallel resistor to the pad which will
lower the output voltage accordingly.
If Bias Control voltage is decreased further than those
lowest values given in the tables, both gain and output power
will start to drop.
Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099
Tel: [phone] Fax: [phone] mimixbroadband.com
Page 2 of 4
Characteristic Data and Specifications are subject to change without notice. ©2006 Mimix Broadband, Inc.
Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept
their obligation to be compliant with U.S. Export Laws.