XX1001-BD_08 Datasheet, PDF (1/6 Pages) Mimix Broadband – 18.0-21.0/36.0-42.0 GHz GaAs MMIC

18.0-21.0/36.0-42.0 GHz GaAs MMIC
Doubler and Power Amplifier
November 2008 - Rev 03-Nov-08
X1001-BD
Features
Integrated Doubler and Power Amplifier
Excellent Saturated Output Stage
+26.0 dBm Output Power
50.0 dBc Fundamental Suppression
100% On-Wafer RF, DC and Output Power Testing
100% Commercial-Level Visual Inspection Using
Mil-Std-883 Method 2010
Chip Device Layout
General Description
Mimix Broadband's 18.0-21.0/36.0-42.0 GHz GaAs MMIC
doubler integrates a doubler and 4-stage power amplifier.
The device provides better than +26.0 dBm output power
and has excellent fundamental rejection. This MMIC uses
Mimix Broadband’s GaAs PHEMT device model technology,
and is based upon electron beam lithography to ensure
high repeatability and uniformity.The chip has surface
passivation to protect and provide a rugged part with
backside via holes and gold metallization to allow either a
conductive epoxy or eutectic solder die attach process. This
device is well suited for Millimeter-wave Point-to-Point
Radio, LMDS, SATCOM and VSAT applications.
Absolute Maximum Ratings
Supply Voltage (Vd)
+6.0 VDC
Supply Current (Id)
800 mA
Gate Bias Voltage (Vg)
+0.3 VDC
Input Power (RF Pin)
TBD
Storage Temperature (Tstg) -65 to +165 ^OC
Operating Temperature (Ta) -55 to MTTF Table¹
Channel Temperature (Tch) MTTF Table¹
(1) Channel temperature affects a device's MTTF. It is
recommended to keep channel temperature as low as
possible for maximum life.
o
Electrical Characteristics (Ambient Temperature T = 25 C)
Parameter
Units Min. Typ. Max.
Input Frequency Range (fin)
GHz
18.0
-
21.0
Output Frequency Range (fout)
GHz
36.0
-
42.0
Input Return Loss (S11)
dB
-
TBD
-
Output Return Loss (S22)
dB
-
12.0
-
Fundamental Rejection
dBc
-
50.0
-
RF Input Power (RF Pin)
dBm
-
0.0
-
Output Power at 0.0 dBm Pin (Pout)
dBm
-
+26.0
-
Drain Supply Voltage (Vd1) Doubler
V
-
2.5
3.0
Drain Supply Voltage (Vd2) Buffer Amp
V
-
3.0
4.0
Drain Supply Voltage (Vd3,4,5,6) PA
V
-
4.5
5.5
Gate Supply Voltage (Vg1) Doubler
V
-
-1.2
-
Drain Supply Current (Id1) Doubler
mA
-
<1.0
-
Drain Supply Current (Id2) Buffer
mA
-
20
25
Drain Supply Current (Id3,4,5,6) (Vg=-0.7V Typical) PA
mA
-
530
600
Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099
Tel: [phone] Fax: [phone] mimixbroadband.com
Page 1 of 6
Characteristic Data and Specifications are subject to change without notice. ©2008 Mimix Broadband, Inc.
Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept
their obligation to be compliant with U.S. Export Laws.