XX1000-QT_10 Datasheet, PDF (1/8 Pages) Mimix Broadband – 7.5-22.5/15.0-45.0 GHz Active Doubler

7.5-22.5/15.0-45.0 GHz Active Doubler
QFN, 3x3 mm
September 2010 - Rev 07-Sep-10
Features
+18 dBm Output Power
-20 dBc Fundamental Leakage
3x3 mm QFN Package
RoHS Compliant
100% RF, DC and Output Power Testing
X1000-QT
General Description
Mimix Broadband's 7.5-22.5/15.0-45.0 GHz SMD active
doubler delivers + 18 dBm of output power. The
device combines an active doubler with an output
buffer amplifier that delivers constant power over a
range of input powers. The device has excellent
rejection of the fundamental and harmonic products
and requires a single positive bias supply. This device
uses Mimix Broadband's 0.15 GaAs pHEMT device
model technology to ensure high reliability and
uniformity. The device comes in a low-cost 3x3mm
QFN Surface Mount Plastic Package offering excellent
RF and thermal properties and is RoHS compliant. This
device is well suited for Point-to-Point Radio,
Microwave, LMDS, SATCOM and VSAT applications.
Absolute Maximum Ratings
Supply Voltage (Vd)
+6.0 VDC
Supply Voltage (Vss)
-6.0 VDC
Supply Current (Id)
300 mA
Supply Current (Iss)
Gate Bias Voltage (Vg)
Input Power (RF Pin)
Storage Temperature (Tstg)
Operating Temperature (Ta)
Channel Temperature (Tch)
60 mA
-0.4 VDC
+15.0 dBm
-65 to +165 ^OC
-55 to MTTF Table¹
MTTF Table¹
(1) Channel temperature affects a device's MTTF. It is
recommended to keep channel temperature as low as
possible for maximum life.
Electrical Characteristics (Ambient Temperature T = 25 ^oC)
Parameter
Units Min. Typ. Max.
Input Frequency Range (fin)
GHz
7.5
-
22.5
Output Frequency Range (fout)
GHz
15.0
-
45.0
Input Return Loss (S11)
dB
-
15.0
-
Output Return Loss (S22)
dB
-
7.0
-
Saturated Output Power (Psat)
dBm
-
+18
-
RF Input Power (RF Pin)
dBm -10.0
-
+10.0
Fundamental Leakage (fin)
dBc
-
20
-
Third Harmonic Leakage (3xfin)
dBc
-
30
-
Fourth Harmonic Leakage (4xfin)
dBc
-
10
-
Drain Bias Voltage (Vd1,2)
VDC
-
+5.0 +5.5
Gate Bias Voltage (Vg1)
VDC
-0.8
-0.6
-0.4
Gate Bias Voltage (Vg2)
VDC
-1.2
0.0
+0.1
Supply Current (Id1,2) (Vd=5.0V, Vg1=-0.6V, Vg2=0.0V Typical) mA
-
220
250
Source Voltage (Vss)
VDC
-5.5
-5.0
-2.0
Source Current (Iss)
mA
25
50
60
Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099
Tel: [phone] Fax: [phone] mimixbroadband.com
Page 1 of 8
Characteristic Data and Specifications are subject to change without notice. ©2010 Mimix Broadband, Inc.
Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept
their obligation to be compliant with U.S. Export Laws.