XX1000-BD_0708 Datasheet, PDF (1/7 Pages) Mimix Broadband – 7.5-25.0/15.0-50.0 GHz GaAs MMIC Active Doubler

7.5-25.0/15.0-50.0 GHz GaAs MMIC
Active Doubler
August 2007 - Rev 16-Aug-07
X1000-BD
Features
Excellent Broadband Mixer Driver
Single Ended Fed Doubler with Distributed
Buffer Amplifier
Excellent LO Driver for Mimix Receivers
+15 dBm Output Drive
100% On-Wafer RF, DC and Output Power Testing
100% Visual Inspection to MIL-STD-883
Method 2010
Chip Device Layout
General Description
Mimix Broadband’s single ended fed (no external
balun required) 7.5-25.0/15.0-50.0 GHz GaAs MMIC
doubler has a +15.0 dBm output drive and is an
excellent LO doubler that can be used to drive
fundamental mixer devices. It is also well suited to
drive Mimix's XR1002 receiver device. This MMIC uses
Mimix Broadband’s 0.15 µm GaAs PHEMT device
model technology, and is based upon electron beam
lithography to ensure high repeatability and
uniformity.The chip has surface passivation to protect
and provide a rugged part with backside via holes
and gold metallization to allow either a conductive
epoxy or eutectic solder die attach process. This
device is well suited for Millimeter-wave
Point-to-Point Radio, LMDS, SATCOM and VSAT
Absolute Maximum Ratings
Supply Voltage (Vd)
+6.0 VDC
Supply Voltage (Vss)
-6.0 VDC
Supply Current (Id)
300 mA
Supply Current (Iss)
60 mA
Gate Bias Voltage (Vg)
+0.3 VDC
Input Power (RF Pin)
Storage Temperature (Tstg)
Operating Temperature (Ta)
Channel Temperature (Tch)
+12.0 dBm
-65 to +165 ^OC
-55 to MTTF Table¹
MTTF Table¹
(1) Channel temperature affects a device's MTTF. It is
recommended to keep channel temperature as low as
possible for maximum life.
applications.
Electrical Characteristics (Ambient Temperature T = 25 ^oC)
Parameter
Units Min. Typ. Max.
Input Frequency Range (fin)
GHz
7.5
-
25.0
Output Frequency Range (fout)
GHz
15.0
-
50.0
Input Return Loss (S11)
dB
-
TBD
-
Output Return Loss (S22)
dB
-
12.0
-
Harmonic Gain (fout)
dB
-
13
-
Fundamental Rejection (fin)
dBc
-
20
-
Saturated Output Power (Psat)
dBm
-
+15
-
RF Input Power (RF Pin)
dBm -10.0
-
+10.0
Output Power at +0.0 dBm Pin (Pout)
dBm
-
+13.0
-
Drain Bias Voltage (Vd1,2)
VDC
-
+5.0 +5.5
Gate Bias Voltage (Vg1)
VDC
-1.2
-0.6
+0.1
Gate Bias Voltage (Vg2)
VDC
-1.2
0.0
+0.1
Supply Current (Id1,2) (Vd=5.0V, Vg1=-0.6V, Vg2=0.0V Typical) mA
-
220
250
Source Voltage (Vss)
VDC
-5.5
-5.0
-2.0
Source Current (Iss)
mA
25
50
60
Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099
Tel: [phone] Fax: [phone] mimixbroadband.com
Page 1 of 7
Characteristic Data and Specifications are subject to change without notice. ©2007 Mimix Broadband, Inc.
Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept
their obligation to be compliant with U.S. Export Laws.