XU1002-BD Datasheet, PDF (1/8 Pages) Mimix Broadband – 18.0-25.0 GHz GaAs MMIC Transmitter

18.0-25.0 GHz GaAs MMIC
Transmitter
August 2007 - Rev 20-Aug-07
U1002-BD
Features
Sub-harmonic Transmitter
Integrated IR Mixer, LO Buffer & Output Amplifier
+20.0 dBm Output Third Order Intercept (OIP3)
2.0 dBm LO Drive Level
15.0 dB Image Rejection, 10.0 dB Conversion Gain
100% On-Wafer RF and DC Testing
100% Visual Inspection to MIL-STD-883 Method 2010
Chip Device Layout
General Description
Mimix Broadband’s 18.0-25.0 GHz GaAs MMIC transmitter has a
+20.0 dBm output third order intercept and 15.0 dB image
rejection across the band. This device is an image reject
sub-harmonic anti-parallel diode mixer followed by a balanced two
stage output amplifier and includes an integrated LO buffer
amplifier. The image reject mixer reduces the need for unwanted
sideband filtering before the power amplifier. The use of a
sub-harmonic mixer makes the provision of the LO easier than for
fundamental mixers at these frequencies. I and Q mixer inputs are
provided and an external 90 degree hybrid is required to select the
desired sideband. This MMIC uses Mimix Broadband’s 0.15 µm GaAs
PHEMT device model technology, and is based upon electron
beam lithography to ensure high repeatability and uniformity. The
chip has surface passivation to protect and provide a rugged part
with backside via holes and gold metallization to allow either a
conductive epoxy or eutectic solder die attach process. This device
is well suited for Millimeter-wave Point-to-Point Radio, LMDS,
SATCOM and VSAT applications.
Absolute Maximum Ratings
Supply Voltage (Vd)
Supply Current (Id1,Id2)
Gate Bias Voltage (Vg)
Input Power (IF Pin)
Storage Temperature (Tstg)
Operating Temperature (Ta)
Channel Temperature (Tch)
+4.5 VDC
320, 165 mA
+0.3 VDC
0.0 dBm
-65 to +165 ^OC
-55 to MTTF Table³
MTTF Table³
(3) Channel temperature affects a device's MTTF. It is
recommended to keep channel temperature as low as
possible for maximum life.
Electrical Characteristics (Ambient Temperature T = 25^o C)
Parameter
Units Min. Typ. Max.
Frequency Range (RF) Upper Side Band
GHz
18.0
-
25.0
Frequency Range (RF) Lower Side Band
GHz
18.0
-
21.0
Frequency Range (LO)
GHz
7.5
-
11.5
Frequency Range (IF)
GHz
DC
-
3.0
Output Return Loss RF (S22)
Small Signal Conversion Gain IF/RF (S21) ²
dB
-
16.0
-
dB
-
10.0
-
LO Input Drive (PLO)
Image Rejection ²
dBm
-
+2.0
-
dBc
-
15.0
-
Isolation LO/RF @ LOx1/LOx2
Output Third Order Intercept (OIP3) ^1,2
dB
-
10.0
-
dBm
-
+20.0
-
Drain Bias Voltage (Vd1)
VDC
-
+3.5 +4.5
Drain Bias Voltage (Vd2)
VDC
-
+4.0 +4.5
Gate Bias Voltage (Vg1,2)
VDC
-1.2
-0.3
+0.1
Supply Current (Id1) (Vd1=3.5V, Vg=-0.3V Typical)
mA
-
230
280
Supply Current (Id2) (Vd2=4.0V, Vg=-0.3V Typical)
(1) Measured using constant current.
(2) Measured using LO Input drive level of +2.0 dBm.
mA
-
116
140
Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099
Tel: [phone] Fax: [phone] mimixbroadband.com
Page 1 of 8
Characteristic Data and Specifications are subject to change without notice. ©2007 Mimix Broadband, Inc.
Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept
their obligation to be compliant with U.S. Export Laws.