XR1006-QD Datasheet, PDF (1/8 Pages) Mimix Broadband – 17.0-25.0 GHz GaAs Receiver QFN, 7x7 mm

17.0-25.0 GHz GaAs Receiver
QFN, 7x7 mm
February 2007 - Rev 16-Feb-07
Features
Sub-harmonic Receiver
Integrated LNA, LO Buffer, Image Reject Mixer
7x7 mm, QFN
+2.0 dBm LO Drive Level
2.5 dB Noise Figure
20.0 dB Image Rejection
100% On-Wafer RF, DC and Noise Figure Testing
General Description
Mimix Broadband’s 17.0-25.0 GHz GaAs packaged receiver has a
noise figure of 2.5 dB and 20.0 dB image rejection across the band.
This device is a two stage balanced LNA followed by an image reject
sub-harmonic anti-parallel diode mixer and includes an integrated
LO buffer amplifer. The image reject mixer eliminates the need for a
bandpass filter after the LNA to remove thermal noise at the image
frequency. The use of a sub-harmonic mixer makes the provision of
the LO easier than for fundamental mixers at these frequencies. I and
Q mixer outputs are provided and an external 90 degree hybrid is
required to select the desired sideband. This device uses Mimix
Broadband’s 0.15 µm GaAs PHEMT device model technology, and is
based upon electron beam lithography to ensure high repeatability
and uniformity.The device comes in a 7x7 mm QFN Surface Mount
Laminate Package offering excellent RF and thermal properties and
is RoHS compliant. This device is well suited for Millimeter-wave
Point-to-Point Radio, LMDS, SATCOM and VSAT applications.
R1006-QD
Absolute Maximum Ratings
Supply Voltage (Vd)
Supply Current (Id1,Id2)
Gate Bias Voltage (Vg)
Input Power (RF Pin)
Storage Temperature (Tstg)
Operating Temperature (Ta)
Channel Temperature (Tch)
+4.5 VDC
180, 165 mA
+0.3 VDC
0.0 dBm
-65 to +165 ^OC
-55 to MTTF Table³
MTTF Table³
(3) Channel temperature affects a device's MTTF. It is
recommended to keep channel temperature as low as
possible for maximum life.
Electrical Characteristics (Ambient Temperature T = 25^o C)
Parameter
Units Min. Typ. Max.
Frequency Range (RF) Upper Side Band
GHz
17.0
-
25.0
Frequency Range (RF) Lower Side Band
GHz
17.0
-
25.0
Frequency Range (LO)
GHz
8.0
-
14.0
Frequency Range (IF)
GHz
DC
-
3.0
Input Return Loss RF (S11)
dB
-
15.0
-
Small Signal Conversion Gain RF/IF (S21)²
dB
-
8.0
-
LO Input Drive (PLO)
dBm
-
+2.0
-
Image Rejection²
dBc
-
20.0
-
Noise Figure (NF)²
dB
-
2.5
-
Isolation LO/RF @ LOx1/LOx2
dB
40.0
-
-
Input Third Order Intercept (IIP3)^1,2
dBm
-
-7.0
-
Drain Bias Voltage (Vd1)
VDC
-
+4.0 +4.5
Drain Bias Voltage (Vd2)
VDC
-
+4.0 +4.5
Gate Bias Voltage (Vg1,2)
VDC
-1.2
-0.3
+0.1
Supply Current (Id1) (Vd1=4.0V, Vg=-0.3V Typical)
mA
-
130
155
Supply Current (Id2) (Vd2=4.0V,Vg=-0.3V Typical)
mA
-
116
140
(1) Measured using constant current.
(2) Measured using LO Input drive level of +2.0 dBm.
Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099
Tel: [phone] Fax: [phone] mimixbroadband.com
Page 1 of 8
Characteristic Data and Specifications are subject to change without notice. ©2007 Mimix Broadband, Inc.
Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept
their obligation to be compliant with U.S. Export Laws.