XP9003_10 Datasheet, PDF (1/5 Pages) Mimix Broadband – 30W Power Amplifier Module

1.6 GHz
30W Power Amplifier Module
March 2010 - Rev 31-Mar-10
P9003-MB
Features
Peak-Envelope Power, 30W with Pulsed Signal
3W Linear Power
38 dB Gain
9V Positive Voltage Supply
Fully Matched Internally
Thermally Efficient for Higher MTTF
Balanced Output Construction
Shielded Metal Lid
Low Harmonic Content
Small Size, 40x36mm
Surface Mount Package
General Description
The XP9003-MB is a highly linear 3-stage power amplifier
module capable of 38 dB of gain, 30W of peak-power
and is housed in a surface mount, thermally efficient
package. XP9003-MB is fully matched internally and does
not require external components. The module operates
off a 9V voltage supply rail and is equipped with active
bias circuit and control voltage allowing for current
setting and minimizing variation over temperature and
voltage. This product is designed specifically for satellite
communication transmitters with high peak to average
signals. XP9003-MB achieves excess of 35 dBm of linear
power and less than -45 dBc adjacent channel power
ratio when operated under a 16 QAM traffic signal with 6
dB peak to average ratio.
Absolute Maximum Ratings
Supply Voltage
+9.0V
RF Input Power
+10 dBm
Storage Temperature
-55°C to 125 °C
Junctions Temperature
175° C
Operating Temperature
-40°C to 85 °C
Thermal Resistance
2.25° C/W
Moisture Sensitivity Rating
MSL 3
ESD (HBM)
TBD
Operating this device above any of the above parameters
may cause permanent damage
XP9003-MB: S-Parameters
50
40
30
20
10
0
-10
-20
-30
-40
-50
0
0.5
1
1.5
2
2.5
3
Frequency (GHz)
Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099
Tel: [phone] Fax: [phone] mimixbroadband.com
Page 1 of 5
Characteristic Data and Specifications are subject to change without notice. ©2010 Mimix Broadband, Inc.
Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept
their obligation to be compliant with U.S. Export Laws.