XP1044-QL_10 Datasheet, PDF (1/10 Pages) Mimix Broadband – 3W Power Amplifier ModuleMarch

3.5-6.0 GHz
3W Power Amplifier Module
March 2010 - Rev 30-Mar-10
P1044-QL
Features
34 dBm P1dB
Pout 26 dBm @ EVM = 2.5% (PAR=9.17 dB)
46 dBm OIP3
18.5 dB Gain
8V Voltage Supply
Input Internally Matched
7x7mm Surface Mount Package
Ideal for WiMAX Applications @ 5.8 GHz and
Applications between 4 GHz and 5 GHz
General Description
The XP1044 is a highly linear 2-stage power amplifier
capable of 18.5 dB of gain, 34 dBm of power at 1 dB
compression and is housed in an RoHS compliant 7x7mm
package. The XP1044 provides less than 2.5% EVM at 26
dBm output power with 802.16 OFDM signal and peak to
average ratio 9.17 dB. The input and output of the device
are internally pre-matched facilitating a simplified input
and output match. This product operates off an 8V
Absolute Maximum Ratings
Drain Supply Voltage (Vd)
+9.0V
Gate Supply Voltage (Vg)
0V ~ -5V
RF Input Power (RFin)
+23 dBm
Stage 1 Current (Idd1)
375 mA
Stage 2 Current (Idd2)
750 mA
Power Dissipation (PDC)
9.0W
Storage Temperature
-55 to +150 ^ºC
voltage supply and requires negative voltage which is
used for current control. The XP1044-QL is specifically
designed for WiMAX applications between 4.9 GHz and 5.9
GHz, and the performance can be shifted by adding
external matching components to cover applications
between 3.5 GHz and 5.0 GHz.
Junctions Temperature
Operating Temperature
ESD (HBM)
Moisture Sensitivity Level
Thermal Resistance (Rth)*
175 ºC
-40 ºC to See Note 1
Class 1A
MSL3
15.6 ºC
*Thermal resistance of stage 2 only
(1) Calculate maximum operating backside temperature using: Tmax =
167 °C – [Vd*Idd2*Rth].Thermal resistance of the 1st stage is 2x Rth of
the output stage, and therefore Idd1 must not exceed ½ Idd2 for a
specific maximum temperature
Electrical Characteristics (T=25 ^oC)
Unless otherwise specified, the following specifications are guaranteed at room temperature in a Mimix test fixture.
Parameter
Units Min. Typ. Max.
Frequency Range (f )
GHz
4.9
5.8
5.9
Power Gain
dB
16.5
18.5
Linear Power (@ EVM=2.5%, OFDM, 802.16 PAR=9.17 dB) _dBm
26.0
Input Return Loss (S11)
dB
-10.0
Output IP3 @ 22 dBm/Tone
dBm
44
46.0
Noise Figure
dB
5
Output P1dB
dBm
32.5
34.0
Stage 1 Supply Current (Idd1)
mA
300
State 2 Supply Current (Idd2)
mA
600
Stage 1 Gate Voltage (Vg1)
V
-1.2
-0.85
-0.5
Stage 2 Gate Voltage (Vg2)
V
-1.2
-0.85
-0.5
Supply Voltage (Vd1 & Vd2)
V
8.0
In production test Idd1 is set to 300mA and Idd2 is set to 600 mA by varying Vg1 and Vg2.
Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099
Tel: [phone] Fax: [phone] mimixbroadband.com
Page 1 of 10
Characteristic Data and Specifications are subject to change without notice. ©2010 Mimix Broadband, Inc.
Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept
their obligation to be compliant with U.S. Export Laws.