XP1043-QH_10 Datasheet, PDF (1/7 Pages) Mimix Broadband – 12.0-16.0 GHz Power Amplifier

12.0-16.0 GHz Power Amplifier
QFN, 4x4mm
February 2010 - Rev 13-Feb-10
P1043-QH
Features
32 dBm Saturated RF Power
41 dBm Output IP3 Linearity
17 dB Gain Control
On-Chip Power Detector
4x4mm Standard QFN Package
100% RF Testing
General Description
The XP1043-QH is a packaged linear power amplifier that
operates over the 12.0-16.0 GHz frequency band. The
device provides 21.5 dB gain and 41 dBm Output Third
Order Intercept Point (OIP3) across the band and is offered
in an industry standard, fully molded 4x4mm QFN package.
The packaged amplifier is comprised of a three stage
power amplifier with an integrated, temperature
compensated on-chip power detector. The device includes
on-chip ESD protection structures and DC by-pass
capacitors to ease the implementation and volume
assembly of the packaged part. The device is
manufactured in GaAs PHEMT device technology with BCB
wafer coating to enhance ruggedness and repeatability of
performance. XP1043-QH is well suited for Point-to-Point
Radio, LMDS, SATCOM and VSAT applications.
Absolute Maximum Ratings¹
Supply Voltage (Vd1,2,3)
+8.0V
Supply Current (Id1,2,3)
1500 mA
Gate Bias Voltage (Vg1,2,3)
-2.4V
Max Power Dissipation (Pdiss)
5.5W
RF Input Power
+19 dBm
Operating Temperature (Ta)
-55 to +85 ºC
Storage Temperature (Tstg)
-65 to +150 ºC
Channel Temperature (Tch)
165 ºC
MSL Level (MSL)
MSL3
ESD Min. - Machine Model (MM)
Class A
ESD Min. - Human Body Model (HBM) Class 1A
(1) Minimum specifications are set under nominal (typ.) bias conditions.
Bias can be adjusted higher to achieve greater linearity and power;
however, maximum total power dissipated is specified at 5.5 W
(2) Channel temperature directly affects a device’s MTTF. Channel
temperature should be kept as low as possible to maximize lifetime.
Electrical Characteristics (Ambient Temperature T = 25 ^oC)
Parameter
Units Min.¹ Typ. Max.
Frequency Range (f )
GHz
12.0
-
16.0
Small Signal Gain (S21)
dB
19.0
21.5
Input Return Loss (S11)
dB
10.0
15.0
Output Return Loss (S22)
dB
10.0
10.0
Reverse Isolation (S12)
dB
55.0
P1dB
dBm
30.0
Psat
dBm
31.0
32.0
OIP3 at Pout = 18 dBm per Tone
dBm
40.0
41.0
Power Detector Range
dB
-
37.0
-
Drain Bias Voltage (Vd1,2,3)
VDC
7.0
7.0
Detector Bias Voltage (Vdet,ref )
VDC
5.0
Gate Bias Voltage (Vg1,2,3)
VDC
-2
-1.0
0.0
Supply Current (Id1)
mA
100
200
Supply Current (Id2)
mA
200
400
Supply Current (Id3)
mA
400
800
(1) Note: Minimum specifications are set under nominal (typ.) bias conditions.
Bias can be adjusted higher to achieve greater linearity and power.
Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099
Tel: [phone] Fax: [phone] mimixbroadband.com
Page 1 of 7
Characteristic Data and Specifications are subject to change without notice. ©2010 Mimix Broadband, Inc.
Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept
their obligation to be compliant with U.S. Export Laws.