XD1002-BD Datasheet, PDF (1/6 Pages) Mimix Broadband – 0.05-50.0 GHz GaAs MMIC Distributed Amplifier

0.05-50.0 GHz GaAs MMIC
Distributed Amplifier
July 2007 - Rev 11-Jul-07
Features
Wide Band Driver Amplifier
9.0 dB Small Signal Gain
5.0 dB Noise Figure
15.0 dB Gain Control
+9.0 dBm P1dB Compression Point
100% On-Wafer RF, DC and Output Power Testing
100% Visual Inspection to MIL-STD-883
Method 2010
D1002-BD
Chip Device Layout
General Description
Mimix Broadband’s 0.05-50.0 GHz GaAs MMIC
distributed amplifier has a small signal gain of 9.0 dB
with a noise figure of 5.0 dB across the band. The
device also includes 15.0 dB gain control and a +9.0
dBm P1dB compression point. This MMIC uses Mimix
Broadband’s 0.15 µm GaAs PHEMT device model
technology, and is based upon electron beam
lithography to ensure high repeatability and uniformity.
The chip has surface passivation to protect and provide
a rugged part with backside via holes and gold
metallization to allow either a conductive epoxy or
eutectic solder die attach process. This device is well
suited for microwave, millimeter-wave, wideband
military, and fiber optic applications.
Absolute Maximum Ratings
Supply Voltage (Vd)
+10.0 VDC
Supply Current (Id)
150 mA
Gate Bias Voltage (Vg)
+0.3 VDC
Input Power (Pin)
+18 dBm
Storage Temperature (Tstg) -65 to +165 ^OC
Operating Temperature (Ta) -55 to MTTF Table²
Channel Temperature (Tch) MTTF Table ²
(2) Channel temperature affects a device's MTTF. It is
recommended to keep channel temperature as low as
possible for maximum life.
o
Electrical Characteristics (Ambient Temperature T = 25 C)
Parameter
Units Min. Typ. Max.
Frequency Range (f )
GHz
0.05
-
50.0
Input Return Loss (S11)
dB
-
14.0
-
Output Return Loss (S22)
dB
-
14.0
-
Small Signal Gain (S21)
dB
-
9.0
-
Gain Flatness ( S21)
dB
-
+/-1.5
-
Gain Control
dB
-
15.0
-
Reverse Isolation (S12)
dB
-
40.0
-
Noise Figure (NF)
Output Power for 1 dB Compression (P1dB)¹
dB
-
5.0
-
dBm
-
+9.0
-
Drain Bias Voltage (Vd)
VDC
-
+8.5 +9.0
Gain Control Bias (Vg1)
VDC
-2.0
0.0
0.1
Gate Bias Voltage (Vg2)
VDC
-
+1.0
-
Supply Current (Id) (Vd=8.5V, Vg1=0.0V, Vg2=1.0V Typical) mA
-
120
140
(1) Measured using constant current.
Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099
Tel: [phone] Fax: [phone] mimixbroadband.com
Page 1 of 6
Characteristic Data and Specifications are subject to change without notice. ©2007 Mimix Broadband, Inc.
Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept
their obligation to be compliant with U.S. Export Laws.