XD1001_10 Datasheet, PDF (1/8 Pages) Mimix Broadband – 18.0-50.0 GHz GaAs MMIC

18.0-50.0 GHz GaAs MMIC
Distributed Amplifier
January 2010 - Rev 11-Jan-10
Features
Ultra Wide Band Driver Amplifier
Fiber Optic Modulator Driver
17.0 dB Small Signal Gain
5.0 dB Noise Figure
30 dB Gain Control
+15.0 dBm P1dB Compression Point
100% On-Wafer RF, DC and Output Power Testing
100% Visual Inspection to MIL-STD-883
Method 2010
General Description
Mimix Broadband’s 18.0-50.0 GHz GaAs MMIC
distributed amplifier has a small signal gain of 17.0 dB
with a noise figure of 5.0 dB across the band. The
device also includes 30.0 dB gain control and a +15
dBm P1dB compression point. This MMIC uses Mimix
Broadband’s GaAs PHEMT device model technology,
and is based upon electron beam lithography to ensure
high repeatability and uniformity.The chip has surface
passivation to protect and provide a rugged part with
backside via holes and gold metallization to allow
either a conductive epoxy or eutectic solder die attach
process. This device is well suited for microwave,
millimeter-wave and wideband military applications.
D1001-BD
Chip Device Layout
Absolute Maximum Ratings
Supply Voltage (Vd)
Supply Current (Id)
Gate Bias Voltage (Vg)
Input Power (Pin)
Storage Temperature (Tstg)
Operating Temperature (Ta)
Channel Temperature (Tch)¹
+6.0 VDC
220 mA
+0.3 VDC
+15 dBm
-65 to +165 ºC
-55 to +85 ºC
+175 ºC
(1) Channel temperature affects a device's MTTF. It is
recommended to keep channel temperature as low as
possible for maximum life.
Electrical Characteristics (Ambient Temperature T = 25 ^oC)
Parameter
Frequency Range (f )
Input Return Loss (S11)²
Output Return Loss (S22)²
Small Signal Gain (S21)²
Gain Flatness ( S21)
Gain Control
Reverse Isolation (S12)²
Noise Figure (NF)
Output Power for 1 dB Compression (P1dB) ¹
Output Third Order Intercept Point (OIP3)¹
Drain Bias Voltage (Vd)
Gain Control Bias (Vg)
Supply Current (Id) (Vd=5.0V, Vg=0.0 Typical)
Units
GHz
dB
dB
dB
dB
dB
dB
dB
dBm
dBm
VDC
VDC
mA
Min.
18.0
5.0
6.0
13.0
-
-
30.0
-
-
-
-
-2.0
-
Typ.
-
10.0
11.0
17.0
+/-1.0
30.0
40.0
5.0
+15.0
+24.0
+5.0
0.0
160
Max.
50.0
-
-
-
-
-
-
-
-
-
+5.5
+0.1
190
(1) Measured using constant current.
(2) Unless otherwise indicated Min/Max over 18.0-50.0 GHz and biased at Vd=5V, Id=160 mA
Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099
Tel: [phone] Fax: [phone] mimixbroadband.com
Page 1 of 8
Characteristic Data and Specifications are subject to change without notice. ©2010 Mimix Broadband, Inc.
Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept
their obligation to be compliant with U.S. Export Laws.