CMM6004-AH Datasheet, PDF (1/6 Pages) List of Unclassifed Manufacturers – 0.25 to 6.0 GHz High Dynamic Range Amplifier

0.25-6.0 GHz
High Dynamic Range Amplifier
February 2007 - Rev 10-Feb-07
CMM6004-AH
Features
Functional Block Diagram
0.25 to 6.0 GHz Frequency Range
+41 dBm Output IP3
Pin 1
1.7 dB Noise Figure
15 dB Gain
+23 dBm P1dB
INPUT
OUTPUT
(BIAS)
LGA Package
Single Power Supply
Single Input Matching
Description
The CMM6004-AH is a high dynamic range amplifier designed for
applications operating within the 0.25 to 6.0 GHz frequency
range. It is an ideal solution for numerous transmit and receive
functions in wireless local loop (WLL) and UNH applications
where high linearity is required.
ALL OTHER PINS GROUNDED
Absolute Maximum Ratings
Supply Voltage
+6.0 V
RF Input Power*
+20 dBm
Storage Temperature
-55ºC to 125ºC
Junction Temperature
150ºC
The amplifier has the flexibility of being optimized for a number
of wireless applications. It is an ideal solution when used as a
driver amplifier in applications including cellular and PCS
(personal communications services) operating from 0.8 to 2.2
GHz; MMDS (multichannel multipoint distribution systems)
operating from 2.2 to 2.7 GHz; WLAN (wireless LAN) operating at
2.4 GHz; WLL (wireless local loop) operating at 3.5 GHz; and
HiperLAN (high performance LAN) and U-NII (unlicensed national
information infrastructure) operating from 5.0 to 6.0 GHz.
Operating Temperature
-40ºC to +85ºC
Thermal Resistance
50ºC/W
Operation of this device above any of these parameters may cause
permanent damage.
*Operation with more than 10 dBm of RF input power may cause 2 dB
degradation in OIP3 performance.
Applications
Wireless Local Loop Transmit and Receive
The CMM6004-AH is packaged in a low-cost, space efficient,
Land Grid Array (LGA) package which provides excellent
electrical stability and low thermal resistance. All devices are
UNH Transmit and Receive
Dual Band 802.11 WLAN
WiMAX
100% RF and DC tested. With single input matching the part
LAN
simplifies design by keeping board space and cost to a
minimum.
Electrical Characteristics (T=25ºC)
Unless otherwise specified, the following specifications are guaranteed at room temperature in a Mimix test fixture.
Parameter
Condition
Min Typ Max Units
Frequency Range
Gain
Externally matched
Input Return Loss
Externally matched
Output IP3
Noise Figure
Output P1dB
Operating Current Range
Supply Voltage
0.25
6.0 GHz
13.5 15
dB
-10
dB
38 41
dBm
1.7
dB
23.0
dBm
120 150 180 mA
5.0
V
Notes:
1. T = 25ºC, Vdd = 5V, Frequency = 2 GHz, 50 Ohm system.
2. OIP3 measured with two tones at output power of 5 dBm/tone separated by 10 MHz.
Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099
Tel: [phone] Fax: [phone] mimixbroadband.com
Page 1 of 6
Characteristic Data and Specifications are subject to change without notice. ©2007 Mimix Broadband, Inc.
Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept
their obligation to be compliant with U.S. Export Laws.