CMM6003-SC Datasheet, PDF (1/5 Pages) List of Unclassifed Manufacturers – 50MHz to 870 MHz High Dynamic Range Amplifier

50-870 MHz
High Dynamic Range Amplifier
March 2007 - Rev 13-Mar-07
Features
50 to 870 MHz Frequency Range
+41 dBm Output IP3
1.6 dB Noise Figure (@ 450 MHz)
17 dB Gain
22 dBm P1dB
SOT-89 SMT Package
Single Power Supply
+3V to +5V Voltage Rail
Description
The CMM6003-SC is a high dynamic range amplifier designed
for applications operating within the 50 MHz to 870 MHz
frequency range. It is an ideal solution for transmit and receive
functions where high linearity is required.
The amplifier has the flexibility of being optimized for a
number of wireless applications. The combination of gain
flatness, bandwidth, low NF and high IP3 at the same bias
point make it an ideal transmit or receive solution when used
in intermediate frequency applications.
The CMM6003-SC is packaged in a low-cost space efficient,
surface mount SOT-89 package which provides excellent
electrical stability and low thermal resistance. All devices are
100% RF (at 800 MHz) and DC tested.
CMM6003-SC (-BD)
Functional Block Diagram
Ground
4
1
2
3
Input Ground Output
Bias
Absolute Maximum Ratings
Supply Voltage
+6.0 V
RF Input Power*
+10 dBm
Storage Temperature
-55ºC to 150ºC
Junction Temperature
150ºC
Operating Temperature
-40ºC to +85ºC
Thermal Resistance
59º C/W
Operation of this device above any of these parameters may cause damage.
*Operation with more than 10 dBm of input power may cause 2 dB
degradation in OIP3 performance.
Electrical Characteristics
Unless otherwise specified, the following specifications are guaranteed at room temperature
in a Mimix test fixture.
Parameter
Condition
Min Typ Max Units
Frequency R ange
Gain
Externally matched
Input Return Loss
Externally matched
Output IP3
Noise Figure
@ 50 MHz
Noise Figure
@ 800 MHz
Output P1dB
Operating Current Range
Supply Voltage
50 800 870 MHz
15 17 18 dB
-11
dB
+41
dB m
3.3
dB
1.9
dB
22
dBm
120 150 180 _mA
5.0
V
Notes:
1. T = 25°C, Vdd = 5.0, Frequency = 800 MHz, 50 Ohm system
2. OIP3 measured with two tones at output power of 5 dBm/tone separated by 10 MHz.
Typical Parameters
Parameter
Frequency Range
Gain
Input Return Loss
Output Return Loss
Output IP3
Output P1dB
Noise Figure
450
17.2
-12.0
-16
+39
23.6
1.6
Typical
800
16.5
-11.5
-14
+41
23.7
1.9
870
16.25
-10.5
-13
+37
23.8
2.0
Units
MHz
dB
dB
dB
dBm
dBm
dB
Notes:
1. Typical values reflect performance in recommended application circuit.
Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099
Tel: [phone] Fax: [phone] mimixbroadband.com
Page 1 of 5
Characteristic Data and Specifications are subject to change without notice. ©2007 Mimix Broadband, Inc.
Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept
their obligation to be compliant with U.S. Export Laws.