CMM6001-SC_07 Datasheet, PDF (1/5 Pages) Mimix Broadband – 0.05-3.0 GHz High Dynamic Range Amplifier

0.05-3.0 GHz
High Dynamic Range Amplifier
August 2007 - Rev 15-Aug-07
Features
0.05 to 3.0 GHz Frequency Range
37 dBm Output IP3
2.8 dB Noise Figure
12.5 dB Gain
20.5 dBm P1dB
SOT-89 SMT Package, RoHS Compliant
Single Power Supply
+3V to +5V Voltage Rail
CMM6001-SC
Functional Block Diagram
Ground
4
1
2
3
Input Ground Output
Bias
Description
The CMM6001-SC is a high dynamic range amplifier designed
for applications operating within the 0.05 to 3.0 GHz frequency
range. It is an ideal solution for transmit and receive functions
where high linearity is required. The amplifier has the flexibility
of being optimized for a number of wireless applications. The
combination of low NF and high IP3 at the same bias point
make it an ideal transmit or receive solution when used in
applications including cellular and PCS (personal
communications service) operating from 0.8 to 2.2 GHz;
MMDS (multichannel multipoint distribution systems)
operating from 2.2 to 2.7 GHz; and WLAN (wireless LAN)
operating at 2.4 GHz.
The CMM6001-SC is packaged in a low-cost space efficient,
surface mount SOT-89 package which provides excellent
electrical stability and low thermal resistance. All devices are
100% RF and DC tested.
Applications
Wireless Local Loop Transmit and Receive
UNH Transmit and Receive
Dual Band 802.11 WLAN
WiMAX
CATV
Absolute Maximum Ratings
Supply Voltage
+6.0 V
RF Input Power
+10 dBm
Storage Temperature
-55ºC to 150ºC
Junction Temperature
150ºC
Operating Temperature
-40ºC to +85ºC
Thermal Resistance
65º C/W
Operation of this device above any of these parameters may cause damage.
Electrical Characteristics
Unless otherwise specified, the following specifications are guaranteed at room temperature in a Mimix test fixture.
Parameter
Condition
Min Typ Max Units
Frequency R ange
Gain
Externally matched
Input Return Loss
Externally matched
Output IP3
Noise Figure
Output P1dB
Operating Current R ange
Supply V oltage
0.05
3.0 GHz
10.5 12.5
dB
-10
dB
+33 +37
dB m
2.8
dB
20.5
dB m
55 75 100 mA
5.0
V
Notes:
1. T = 25°C, Vdd = 5.0, Frequency = 800 MHz, 50 Ohm system
2. OIP3 measured with two tones at output power of 5 dBm/tone separated by 10 MHz.
Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099
Tel: [phone] Fax: [phone] mimixbroadband.com
Page 1 of 5
Characteristic Data and Specifications are subject to change without notice. ©2007 Mimix Broadband, Inc.
Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept
their obligation to be compliant with U.S. Export Laws.