CMM1200-BD_07 Datasheet, PDF (1/5 Pages) Mimix Broadband – 2.0-6.0 GHz GaAs MMIC Low Noise Amplifier

2.0-6.0 GHz GaAs MMIC
Low Noise Amplifier
August 2007 - Rev 05-Aug-07
Features
Small Size: 1.60 x 1.55 x 0.076 mm
Integrated On-Chip Drain Bias Coil
Integrated On-Chip DC Blocking
Single Bias Operation
Directly Cascadable – Fully Matched, Novel
Feedback & Distributed AmplifierDesign
P1dB: 15.5 dBm @ 6 GHz, Typ.
High LinearGain: 17.5 dB Typ.
Noise Figure: 3.3 dB Typ. @ 6 GHz
pHEMTTechnology
Silicon Nitride Passivation
CMM1200-BD
Chip Diagram
1
Specifications (TA= 25°C,Vdd = 5V)
Parameters
Frequency Range
Linear Gain
Gain Variation (over operating frequency)
Power Output (@1 dB Gain Compression)
P1dB Variation (over operating frequency)
Saturated Output Power
Third Order Intercept Point (@ 6 GHz)
Second Order Intercept Point (@ 6 GHz)
Noise Figure (@6 GHz)
Input Return Loss ²
Output Return Loss ²
Current
Thermal Resistance
Stability
Notes: 1. Tested on Celeritek connectorized evaluation board.
2. Measured on wafer.
Units
GHz
dB
±dB
dBm
dBm
dBm
dBm
dBm
dB
dB
dB
mA
°C/W
Min
2.0
16.0
14.0
19.0
85
Unconditionally Stable
Typ
17.5
15.5
25.5
41.0
3.3
100
34.0
Max
6.0
2.0
1.0
23.0
3.8
-9.5
-12.0
115
1
Absolute Maximum Ratings
Parameter
Rating
Drain Voltage
4.5V (min.) / 8.0V (max.)
Drain Current
150 mA
Continuous Power Dissipation
1.2 W
Input Power
10 dBm
Storage Temperature
-50°C to +150°C
Channel Temperature
175°C
Operating Backside Temperature ²
-40°C Min.
Notes: 1. Operation outside these limits can cause permanent damage.
2. Calculation maximum operating temperature:
Tmax = 175–(Pdis [W] x 34) [°C].
Die Attach and Bonding Procedures
Die Attach: Eutectic die attach is recommended. For eutec-
tic die attach: Preform: AuSn (80% Au, 20% Sn); Stage
Temperature: 290°C, ±5°C; Handling Tool: Tweezers; Time: 1
min or less.
Wire Bonding: Wire Size: 0.7 to 1.0 mil in diameter (pre-
stressed); Thermocompression bonding is preferred over ther-
mosonic bonding. For thermocompression bonding: Stage
Temperature: 250°C; Bond Tip Temperature: 150°C; Bonding
Tip Pressure: 18 to 40 gms depending on size of wire.
Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099
Tel: [phone] Fax: [phone] mimixbroadband.com
Page 1 of 5
Characteristic Data and Specifications are subject to change without notice. ©2007 Mimix Broadband, Inc.
Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept
their obligation to be compliant with U.S. Export Laws.