CMM0016-BD_09 Datasheet, PDF (1/9 Pages) Mimix Broadband – 2.0-22.0 GHz GaAs MMIC

2.0-22.0 GHz GaAs MMIC
Power Amplifier
September 2009 - Rev 14-Sep-09
Features
Ultra Wide Band Power Amplifier
Compact Size/Self Bias Architecture
Positive Gain Slope
9.0 dB Small Signal Gain
+30.0 dBm P1dB Compression Point
+37.0 dBm Third Order Intercept
100% Visual Inspection to MIL-STD-883
Method 2010
General Description
Mimix Broadband’s distributed 2.0-22.0 GHz GaAs
MMIC power amplifier has a small signal gain of 9.0
dB with a +30.0 dBm P1dB output compression point.
This MMIC uses Mimix Broadband’s GaAs PHEMT
device model technology, and is based upon electron
beam lithography to ensure high repeatability and
uniformity.The chip has surface passivation to protect
and provide a rugged part with backside via holes
and gold metallization to allow either a conductive
epoxy or eutectic solder die attach process. This
device is well suited for Test Instrumentation, Military,
Space, Microwave Point-to-Point Radio, SATCOM and
VSAT applications.
CMM0016-BD
Chip Device Layout
Absolute Maximum Ratings
Supply Voltage (Vd)
+12.0 VDC
Supply Current (Id1)
750 mA
Input Power (Pin)
+27.0 dBm
Storage Temperature (Tstg) -65 to +165 ºC
Operating Temperature (Ta) -55 to +85 ºC
Channel Temperature (Tch)¹ +175 ºC
(1) Channel temperature affects a device's MTTF. It is
recommended to keep channel temperature as low as
possible for maximum life.
Electrical Characteristics (Ambient Temperature T = 25 ^oC)
Parameter
Frequency Range (f )
Input Return Loss (S11)
Output Return Loss (S22)
Small Signal Gain (S21)
Gain Flatness ( S21)
Reverse Isolation (S12)
Output Power for 1dB Compression (P1dB) @ 18 GHz
Output Third Order Intermods (OIP3)
Saturated Output Power (Psat)
Drain Bias Voltage (Vd)
Supply Current (Id) (Vd=12.0V Typical)
Units
GHz
dB
dB
dB
dB
dB
dBm
dBm
dBm
VDC
mA
Min.
2.0
8.0
5.0
6.0
-
-
+28.0
-
-
-
-
Typ.
-
15.0
10.0
9.0
+/-1.5
40.0
+29.0
+37.0
+30.0
+11.5
690
Max.
22.0
-
-
-
-
-
-
-
-
+11.8
730
100% on-wafer DC testing and 100% RF wafer qualification. Wafer qualification includes sample testing from each quadrant
with an 80% pass rate required.
Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099
Tel: [phone] Fax: [phone] mimixbroadband.com
Page 1 of 9
Characteristic Data and Specifications are subject to change without notice. ©2009 Mimix Broadband, Inc.
Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept
their obligation to be compliant with U.S. Export Laws.