CHV2710-QJ_0610 Datasheet, PDF (1/7 Pages) Mimix Broadband – 2.5 GHz InGaP HBT 5W Linear Power Amplifier

2.5 GHz InGaP HBT
5W Linear Power Amplifier
October 2006 - Rev 23-Oct-06
Features
Internal Pre-matching
Single Supply operation, 12V
Power Gain 9 dB
ESD Protection on board
Current Control for multiple applications
2.5% EVM @ 29 dBm avg power, 802.16 OFDM
signal format, PAR = 9 dB
Low Thermal Resistance
Ideal for WiMAX and WiBRO applications
RoHS compliant 6x6 QFN package
CHV2710-QJ
General Description
The CHV2710 internally pre-matched power HBT device
provides 9 dB of gain, 2.5% EVM at 29 dBm output power
for 802.16 OFDM signal with a peak to average power ratio
of 9 dB. The device operates off a single supply voltage up
to 12V and includes internal bias circuitry to enable exact
setting of the quiescent current using an external Vcontrol.
This Vcontrol is non-unique voltage setting and the same
value can be used for each part depending on the required
Icq. The device is ideal for high linearity, high data rate
applications such as WiMAX and WiBRO. Internal
pre-matching facilitates a simplified external matching
approach and the highest in-band gain potential of the
device. The device operates with unique matching at each
of the popular WiMAX bands with the inherent
repeatability of an InGaP HBT process.
Absolute Maximum Ratings
Voltage Supply (Vcc)
4.5 (min) / 12 V (max)
Current (Icc)
2000 mA
Dissipated Power (Pdiss)
18W
Input Power (Pin)
22 dBm
Storage Temperature (Tstg)
-60 to +150 ^ºC
Channel Temperature (Tch)
175 ºC
Thermal Resistance (Rth)
5 ºC/W
Operating Backside Temperature (Tb) -40 ºC to (see note 1)
Operation outside any of these limits can cause permanent damage.
(1) Caclulate maximum operating temperature Tmax using the
following formula: Tmax=175-(Pdiss [W] x 5) [C].
Electrical Characteristics (Ambient Temperature T=25 ^oC,Vcc=12V)¹
Parameter
Operating Frequency (f )
Quiescent Current² (Icq)
Power Gain @ Pout = 29 dBm (Gps)
Current @ 29 dBm (Icc)
Output Power @ EVM = 2.5%³
Adjacent Channel Power Ratio @ Pout = 29 dBm⁴ (ACPR)
Input Reflection Coefficient (S11)
Noise Figure (NF)
1. Data measured in a Mimix matched connectorized fixture.
2. Quiescent current depends on Vcc
3. Using an 802.1 6d OFDM signal format with PAR=9 dB
4. Using 3 GPP WCDMA signal, PAR = 9.17 dB
Units
GHz
mA
dB
mA
dBm
dBc
dB
dB
CHV2710-QJ-0G00
(WiMAX 2.5 GHz)
Min. Typ. Max.
2.5 2.6 2.7
- 730 760
-
9
-
- 770 800
29
-
-
-
-45
-
-12
4
CHV2710-QJ-0GA0
(WiBRO 2.3 GHz)
Min. Typ. Max.
2.3 2.35 2.4
- 730 760
-
10
-
770 800
29
-
-
-
-45
-
-12
4
Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099
Tel: [phone] Fax: [phone] mimixbroadband.com
Page 1 of 7
Characteristic Data and Specifications are subject to change without notice. ©2006 Mimix Broadband, Inc.
Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept
their obligation to be compliant with U.S. Export Laws.