CGB8002-SC Datasheet, PDF (1/12 Pages) Mimix Broadband – DC-2.8 GHz InGaP HBT 3.3V, Matched Gain Block Amplifier

DC-2.8 GHz InGaP HBT
3.3V, Matched Gain Block Amplifier
April 2008 - Rev 28-Apr-08
CGB8002-SC
Features
14 dBm Linear Power @ 2140 MHz
17 dB Gain @ 2140 MHz
15 dB Gain @ 2700 MHz
37dBm OIP3 @ 2700 MHz
22 dBm P1dB @ 2140 MHz
Low Performance Variation Over Temperature
Low Cost: SOT-89 Package
100% DC On-Wafer Testing
ESD Protection on All Die: >4000V HBM, >400V MM
Low Thermal Resistance: <35ºC/Watt
Low Volt Supply: 3.3V, On-Board Bias
Description
The CGB8002-SC is a single stage, high power, high dynamic
range, utility gain block amplifier. Designed for 3.3V applications
operating within the DC to 2.8 GHz frequency range, Mimix’s
broadband, cascadable, gain block amplifier is an ideal solution
for transmit, receive and IF applications. This MMIC amplifier is
available in an industry standard, RoHS compliant, SOT-89
package. Mimix's InGaP HBT technology and thermal resistance
offers a thermally robust and reliable gain block solution. The
InGaP HBT die have extra pads to enable thorough DC testing.
This unique test capability and the inclusion of ESD protection
on all die, significantly enhances the quality, reliability and
ruggedness of these products. This gain block amplifier offers
significant ease of use in a broad range of applications. The
combination of high gain, P1dB and high linear power at low
current makes the CGB8002-SC an ideal transmit and receive
solution when used in applications including 3G, fixed wireless
broadband, WLAN and WiMAX services operating from 2.1 to
2.7 GHz. The device is biased with a single +3.3V supply.
Functional Block Diagram (SOT-89)
Ground
4
1
2
3
Input Ground Output
Bias
Absolute Maximum Ratings
Max Device Voltage
+4.2 V
Max Device Current
250 mA
Max Device Dissipated Power
1W
RF Input Power
+15 dBm
Storage Temperature
-55ºC to 150ºC
Junction Temperature
150ºC
Operating Temperature
-40ºC to +85ºC
Thermal Resistance
35º C/W
ESD (HBM)
4000 V
ESD (MM)
400V
Operation of this device above any of these parameters may cause
permanent damage.
Applications
PA Driver Amp, IF Amp, LO Buffer Amp
UMTS, 3G, WLAN, WiMAX
Wireless Broadband, Fixed Wireless, SATCOM
Transmit and Receive Functions
CATV
Typical Performance: (3.3V, Iq=120 mA, 25 °C)
Parameters
Symbol Unit
Frequency
F
MHz 900 2140 2500 2700 2800
Small Signal Gain
S21
dB 20.2 17.1 15.8 15.1 14.7
Output Power at 1dB Compression P1dB dBm 21.5 22.1 22.5 22.4 22
Third Order Intercept Point
OIP3 dBm 35 35.6 37 37.4 37.7
Noise Figure
NF
dB 4.4 4.5 4.7 5.2 5.6
Notes:
1. OIP3 is @ 8 dBm/tone
2.Typical values reflect performance in recommended application circuit.
Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099
Tel: [phone] Fax: [phone] mimixbroadband.com
Page 1 of 12
Characteristic Data and Specifications are subject to change without notice. ©2008 Mimix Broadband, Inc.
Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept
their obligation to be compliant with U.S. Export Laws.