CGB7389-SC_0607 Datasheet, PDF (1/15 Pages) Mimix Broadband – 2.1-2.5 GHz InGaP HBT Matched Gain Block Amplifier

2.1-2.5 GHz InGaP HBT
Matched Gain Block Amplifier
July 2006 - Rev 26-Jul-06
CGB7389-SC
Features
41.0 dBm Output IP3 @ 2450 MHz
14.6 dB Gain @ 2140 MHz
13.2 dB Gain @ 2450 MHz
24.3 dBm P1dB @ 2450 MHz
Low Performance Variation Over Temperature
Low Cost: SOT-89 Package
100% DC On-Wafer Testing
ESD Protection on All Die: >2000V HBM
Low Thermal Resistance: <35ºC/Watt
Low Volt Supply: 5V, Active Bias
Applications
PA Driver Amp, IF Amp, LO Buffer Amp
UMTS, 3G, WLAN, WiMAX
Wireless Broadband, Fixed Wireless, SATCOM
Transmit and Receive Functions
CATV
Description
The CGB7389-SC is a single stage, high power, high
dynamic range, utility gain block amplifier. Designed for
applications operating within the 2.1 to 2.5 GHz frequency
range, Mimix’s broadband, cascadable, gain block amplifier is
an ideal solution for transmit, receive and IF applications.
This MMIC amplifier is available in an industry
standard SOT-89 package. Mimix's InGaP HBT technology and
an industry low thermal resistance offers a thermally robust
and reliable gain block solution.
Functional Block Diagram (SOT-89)
Ground
4
1
2
3
Input Ground Output
Bias
Absolute Maximum Ratings
Max Device Voltage
+6.0 V
Max Device Current
200 mA
Max Device Dissipated Power
1.2 W
RF Input Power
+17 dBm
Storage Temperature
-55ºC to 150ºC
Junction Temperature
150ºC
Operating Temperature
-40ºC to +85ºC
Thermal Resistance
35º C/W
EDS (HBM)
2000 V
Operation of this device above any of these parameters may cause
permanent damage.
The InGaP HBT die have extra pads to enable
thorough DC testing. This unique test capability and the
inclusion of ESD protection on all die, significantly enhances
the quality, reliability and ruggedness of these products.
This gain block amplifier offers significant ease of
use in a broad range of applications. The combination of
high gain, P1dB and high OIP3 at low current makes the
CGB7389-SC an ideal transmit and receive solution when
used in applications including 3G, fixed wireless broadband,
WLAN and WiMAX services operating from 2.1 to 2.5 GHz.
E_Unl_lee_ssc_ott_her_rwic_isea_spl_ecC_ifieh_{d, t}a_her_fa_olloc_wt_ine_gr_spi_es_cit_fici_ac_tios_ns(_ar5_{e g}V_ua,_rA_antec_et_d i_av_{t ro}e_omB_tei_ma_pes_ra)_{ture in a Mimix test fixture.}
2140 MHz
Parameter
Temperature (ºC)
Min.
Typ.
Max.
Small Signal Gain
+25
13.3
14.3
15.3
-40 to +85
12.9
14.3
15.3
Output P1dB
+25
22.0
23.0
-40 to +85
21.8
23.0
Output IP3
+25
37.5
39.0
-40 to +85
37.0
39.0
Noise Figure
+25
4.2
5.2
-40 to +85
4.2
5.7
Operating Current
+25
105
115
125
-40 to +85
100
115
130
Input Return Loss
+25
10
14
-40 to +85
9
14
Output Return Loss
+25
16.0
24.0
-40 to +85
15.0
24.0
Pout @ -45 dBc, ACP
+25
14.0
IS-95, 9 Forward Channels -40 to +85
14.0
2450 MHz
Min.
Typ.
Max.
Units
12.0
13.0
14.0
dB
11.6
13.0
14.4
dB
22.5
23.5
dBm
22.3
23.5
dBm
39.5
40.5
dBm
39.0
41.0
dBm
4.5
5.7
dB
4.5
6.2
dB
105
115
125
mA
100
115
130
mA
12
16
dB
11
16
dB
12.0
16.0
dB
11.0
16.0
dB
15.0
dBm
15.0
dBm
Notes: 1. Test Conditions in Mimix eval board, Vs = 5 V, Id = 115 mA Typ., Zs = Zl = 50 , OIP3 tone spacing = 1 MHz, Pout per tone = 11 dBm.
2. Values reflect performance in recommended application circuit.
Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099
Tel: [phone] Fax: [phone] mimixbroadband.com
Page 1 of 15
Characteristic Data and Specifications are subject to change without notice. ©2006 Mimix Broadband, Inc.
Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept
their obligation to be compliant with U.S. Export Laws.