CGB7289-SC Datasheet, PDF (1/19 Pages) Mimix Broadband – DC-2.5 GHz InGaP HBT Matched Gain Block Amplifier

DC-2.5 GHz InGaP HBT
Matched Gain Block Amplifier
May 2006 - Rev 23-May-06
CGB7289-SC
Features
41.0 dBm Output IP3 @ 2140 MHz
21.0 dB Gain @ 900 MHz
13.3 dB Gain @ 2140 MHz
23.7 dBm P1dB @ 2140 MHz
Low Performance Variation Over Temperature
Low Cost: SOT-89 Package
100% DC On-Wafer Testing
ESD Protection on All Die: >2000V HBM
Low Thermal Resistance: <35ºC/Watt
Low Volt Supply: 5V, Active Bias
Applications
PA Driver Amp, IF Amp, LO Buffer Amp
Cellular, PCS, GSM, UMTS, 3G
Wireless Data and SATCOM
Transmit and Receive Functions
CATV
Description
The CGB7289-SC is a single stage, high power, high
dynamic range, utility gain block amplifier. Designed for
applications operating within the DC to 2.5 GHz frequency
range, Mimix’s broadband, cascadable, gain block amplifier is
an ideal solution for transmit, receive and IF applications.
This MMIC amplifier is available in an industry
standard SOT-89 package. Mimix's InGaP HBT technology and
an industry low thermal resistance offers a thermally robust
and reliable gain block solution.
The InGaP HBT die have extra pads to enable
Functional Block Diagram (SOT-89)
Ground
4
1
2
3
Input Ground Output
Bias
Absolute Maximum Ratings
Max Device Voltage
+6.0 V
Max Device Current
200 mA
Max Device Dissipated Power
1.2 W
RF Input Power
+17 dBm
Storage Temperature
-55ºC to 150ºC
Junction Temperature
150ºC
Operating Temperature
-40ºC to +85ºC
Thermal Resistance
35º C/W
EDS (HBM)
2000 V
Operation of this device above any of these parameters may cause
permanent damage.
thorough DC testing. This unique test capability and the
inclusion of ESD protection on all die, significantly enhances
the quality, reliability and ruggedness of these products.
This gain block amplifier offers significant ease of
use in a broad range of applications. The combination of
high gain, P1dB and high OIP3 at low current makes the
CGB7289-SC an ideal transmit and receive solution when
used in applications including cellular, PCS and 3G services
operating from 0.8 to 2.2 GHz.
E_Unl_lee_ssc_ott_her_rwic_isea_spl_ecC_ifieh_{d, t}a_her_fa_olloc_wt_ine_gr_spi_es_cit_fici_ac_tios_ns(_ar5_{e g}V_ua,_rA_antec_et_d i_av_{t ro}e_omB_tei_ma_pes_ra)_{ture in a Mimix test fixture.}
Parameter
Small Signal Gain
Output P1dB
Output IP3
Noise Figure
Operating Current
Input Return Loss
Output Return Loss
Pout @ -45 dBc, ACP
IS-95, 9 Forward Channels
Temperature (ºC)
+25
-40 to +85
+25
-40 to +85
+25
-40 to +85
+25
-40 to +85
+25
-40 to +85
+25
-40 to +85
+25
-40 to +85
+25
-40 to +85
900 MHz
Min. Typ. Max.
20.0 21.0 22.0
19.7 21.0 22.3
22.1 23.1
21.8 23.1
37.0 38.5
36.5 38.5
4.0 4.8
4.0 5.2
105 115 125
100 115 130
12 18
11 18
5.5 7.5
5.0 7.5
16.5
16.5
1960 MHz
Min. Typ. Max.
13.5 14.5 15.5
13.2 14.5 15.8
22.8 23.8
22.5 23.8
39.0 40.5
38.5 40.5
4.9 5.7
4.9 6.2
105 115 125
100 115 130
11 16
10 16
11.0 16.0
10.0 16.0
17.5
17.5
2140 MH
Min. Typ. Max.
12.3 13.3 14.3
12.0 13.3 14.6
22.7 23.7
22.4 23.7
39.5 41.0
39.0 41.0
5.5 6.3
5.5 6.7
105 115 125
100 115 130
11 15
10 15
10.0 13.0
9.5 13.0
Units
dB
dB
dBm
dBm
dBm
dBm
dB
dB
mA
mA
dB
dB
dB
dB
dBm
dBm
Notes: 1. Test Conditions in Mimix eval board, Vs = 5 V, Id = 115 mA Typ., Zs = Zl = 50 , OIP3 tone spacing = 1 MHz, Pout per tone = 11 dBm.
2. Values reflect performance in recommended application circuit.
Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099
Tel: [phone] Fax: [phone] mimixbroadband.com
Page 1 of 19
Characteristic Data and Specifications are subject to change without notice. ©2006 Mimix Broadband, Inc.
Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept
their obligation to be compliant with U.S. Export Laws.