CGB7008-BD Datasheet, PDF (1/7 Pages) Mimix Broadband – DC-6.0 GHz InGaP HBT MMIC Matched Gain Block Amplifier

DC-6.0 GHz InGaP HBT MMIC
Matched Gain Block Amplifier
April 2007 - Rev 03-Apr-07
CGB7008-BD
Features
33.5 dBm Output IP3 @ 850 MHz
3.2 dB Noise Figure @ 850 MHz
21.2 dB Gain @ 850 MHz
18.8 dBm P1dB @ 850 MHz
Low Performance Variation Over Temperature
100% DC On-Wafer Testing
ESD Protection on All Die: >1000V HBM
Low Thermal Resistance: <80ºC/Watt
Chip Layout
Absolute Maximum Ratings
Description
The CGB7008-BD is a Darlington Configured, high dynamic range,
utility gain block amplifier. Designed for applications operating
within the DC to 6.0 GHz frequency range, Mimix’s broadband,
cascadable, gain block amplifiers are ideal solutions for transmit,
receive and IF applications.
Max Device Voltage
Max Device Current
Max Device Dissipated Power
RF Input Power
Storage Temperature
+6.0 V
130 mA
0.65 W
+17 dBm
-55ºC to 150ºC
These MMIC amplifiers are available in bare die form. Mimix's
InGaP HBT technology and an industry low thermal resistance
offers a thermally robust and reliable gain block solution.
The InGaP HBT die have extra pads to enable thorough DC
testing. This unique test capability and the inclusion of ESD
protection on all die, significantly enhances the quality, reliability
and ruggedness of these products.
With a single bypass capacitor, optional RF choke and two DC
blocking capacitors, this gain block amplifier offers significant
ease of use in a broad range of applications.
Junction Temperature
150ºC
Operating Temperature
-40ºC to +85ºC
Thermal Resistance
80º C/W
EDS (HBM)
1000 V
Operation of this device above any of these parameters may cause
permanent damage.
Applications
PA Driver Amp, IF Amp, LO Buffer Amp
Cellular, PCS, GSM, UMTS
Wireless Data and SATCOM
Transmit and Receive Functions
CATV
Typical Performance
Parameter
Small Signal Gain
Output P1dB
Output IP3
Noise Figure
Operating Current
Input Return Loss
Output Return Loss
Pout @ -45 dBc, ACP
IS-95, 9 Forward Channels
Temperature (ºC)
+25
-40 to +85
+25
-40 to +85
+25
-40 to +85
+25
-40 to +85
+25
-40 to +85
+25
-40 to +85
+25
-40 to +85
+25
-40 to +85
850 MHz
Min. Typ. Max.
20.0 21.2 22.4
19.8 21.2 22.6
17.8 18.8
17.3 18.8
32.0 33.5
31.5 33.5
3.2 4.0
3.2 4.3
59 64 68
55 64 73
14.0 19.0
13.0 19.0
17.0 25.0
16.0 25.0
13
13
1950 MHz
Min. Typ. Max.
17.0 18.2 19.4
16.8 18.2 19.6
16.7 17.7
16.4 17.7
30.0 31.5
29.5 31.5
3.2 4.0
3.2 4.3
59 64 69
55 64 73
11.0 16.0
10.0 16.0
12.0 18.0
11.0 18.0
13
13
2400 MHz
Min. Typ. Max.
16.0 17.2 18.4
15.8 17.2 18.6
15.6 16.6
15.3 16.6
29.0 30.5
28.5 30.5
3.4 4.2
3.4 4.5
59 64 69
55 64 73
10.0 16.0
9.5 16.0
12.0 19.0
11.0 19.0
3500 MHz
Min. Typ. Max.
15.5
14.3
27.5
3.5
64
14.0
16.5
Units
dB
dB
dBm
dBm
dBm
dBm
dB
dB
mA
mA
dB
dB
dB
dB
dBm
dBm
Notes: 1. Performance in Mimix eval board, Vs = 8 V, Id = 64 mA Typ., Rbias = 47 , Zs = Zl = 50 , OIP3 tone spacing = 1 MHz, Pout per tone = 3 dBm.
2. Values reflect performance in recommended application circuit.
3. Only on-wafer DC test is done. Devices are not tested for RF performance.
Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099
Tel: [phone] Fax: [phone] mimixbroadband.com
Page 1 of 7
Characteristic Data and Specifications are subject to change without notice. ©2006 Mimix Broadband, Inc.
Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept
their obligation to be compliant with U.S. Export Laws.