CFA0103 Datasheet, PDF (1/2 Pages) List of Unclassifed Manufacturers – LOW-NOISE GaAs FETS

Low Noise GaAs FETs
July 2006 - Rev 31-Jul-06
CFA0103
Features
High Gain
Super Low Noise
Pseudomorphic HEMT
70 Mil Hermetic Package
Applications
Satellite Receivers
Point-to-Point Radio Receivers
Commercial Communications
Defense Electronics
General Description
The CFA0103-L series is a family of low noise, high-gain FETs intended for satellite and point-to-point radio receiver
applications. This family of devices is assembled in an industry standard 70 mil hermetic package. This family of high
reliability devices is ideally suited for operation-critical applications where reliability and performance are required.
Typical Noise Parameters
(Vds = 3V, Ids = 15 mA)
Absolute Maximum Ratings
Drain-Source Voltage (Vds) 8 V
Freq NF_opt G_A Gamma Opt Rn/50
(GHz)
(dB) Mag Ang
Gate-Source Voltage (Vgs) -5 V
Drain Current (Ids)
Idss
2.0 0.39 23.6 0.87 36 0.42
Continuous Dissipation (Pt) 800 mW
4.0 0.47 18.3 0.77 71 0.34
RF Power In (Pin)
+17 dBm
6.0 0.57 15.2 0.69 100 0.27
Channel Temperature (Tch) 175 ºC
8.0 0.69 13.0 0.63 124 0.22
Storage Temperature (Tstg) -65 ºC to +175 ºC
10.0 0.84 11.5 0.58 147 0.18
12.0 1.00 10.6 0.53 171 0.16
14.0 1.18 10.1 0.49 -163 0.15
16.0 1.38 9.9 0.46 -132 0.16
18.0 1.60 9.8 0.42 -94 0.18
Electrical Characteristics (Ambient Temperature T = 25 ^oC)
Parameter
Bias
Frequency
Vds (V) Ids (mA) (GHz) Units Grade Min Typ Max
NFopt
3.0
15.0
12.0
dB
L1
-
0.7 0.8
L2
-
0.9 1.0
L3
-
0.9 1.2
Ga
3.0
15.0
12.0
dB
L1 10.0 11.0 -
L2 10.0 11.0 -
L3 8.0 9.0 -
IS211²
3.0
15.0
2.0
dB
13.0
10.0
dB
9.6
18.0
dB
7.2
P1dB
6.0
40.0
12.0
dBm
19.0
gm
Vds = 3.0V Vgs = V
mS
90.0
Idss
Vds = 3.0V Vgs = 0V
mA
30.0 60.0 120.0
Vp
Vds = 3.0V Ids = 1 mA
Volts
-0.5 -1.3 -2.5
BVgd
Igd = 100 uA
Volts
-5.5 -8.0
Rth
ºC/W
250
Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099
Tel: [phone] Fax: [phone] mimixbroadband.com
Page 1 of 2
Characteristic Data and Specifications are subject to change without notice. ©2006 Mimix Broadband, Inc.
Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept
their obligation to be compliant with U.S. Export Laws.