800 Datasheet, PDF (1/1 Pages) Microsemi Corporation – RECTIFIERS ASSEMBLIES THREE PHASE BRIDGES, 20-40 AMP, STANDARD HIGH EFFICIENCY, ESP

INTERCONNECTS
Series 800, 801
.100” Grid (.030” dia.) Low Profile Headers & Versatile Sockets
802, 803
Single and Double Row
Fig. 1
• Series 800 and 802 single and double
row pin headers use MM #5016 pins.
See page 182 for details.
• Series 801 and 803 single and double
row sockets use MM #1303 pins. See
page 150 for details.
• Series 801 and 803 receptacles use
Hi-Rel, 6-finger BeCu #47 contacts
rated at 4.5 amps. Receptacles accept
.025” diameter and .025” square pins.
See page 221 for details.
• Insulators are high temp. thermoplastic.
RoHS
2002/95/EC
Fig. 2
Fig. 1
Fig. 2
Ordering Information
Single Row
Low Profile Pin Header
800-XX-0_ _-10-002000
Specify # of pins
01-64
Double Row
Low Profile Pin Header
802-XX-0 _ _-10-002000
Specify # of pins
02-64
Fig. 3
Fig. 4
Fig. 5
www.mill-max.com
For Electrical,
Mechanical & Enviromental
Data, See pg. 4
XX=Plating Code
See Below
For RoHS compliance
select plating code.
SPECIFY PLATING CODE XX=
10
90
40
Pin Plating
10μ” Au 200μ” Sn/Pb 200μ” Sn
Single Row Low Profile Socket (short insulator)
Fig. 3
801-XX-0 _ _-10-002000
Specify # of pins
01-64
Fig. 4
Single Row Low Profile Socket (long insulator)
801-XX-0 _ _-10-012000
Specify # of pins
01-36
Fig. 5
Double Row Low Profile Socket
803-XX-0 _ _-10-002000
Specify # of pins
02-72
For Electrical,
Mechanical & Enviromental
Data, See pg. 4
XX=Plating Code
See Below
For RoHS compliance
select plating code.
SPECIFY PLATING CODE XX= 1 3
91
93
99
41
43
44
Sleeve (Pin)
10µ” Au 200µ” Sn/Pb 200µ” Sn/Pb 200µ”Sn/Pb 200µ”Sn 200µ”Sn 200µ”Sn
Contact (Clip)
30µ” Au 10µ” Au 30µ” Au 200µ”Sn/Pb 10µ” Au 30µ” Au 200µ”Sn
80
516-922-6000