800-10-001-10-001000 Datasheet, PDF (1/1 Pages) Mill-Max Mfg. Corp. – INTERCONNECTS .100” Grid (.030” dia.) Pins, Straight and Right Angle Single Row

INTERCONNECTS
.100” Grid (.030” dia.) Pins, Straight and Right Angle
Single Row
Fig. 1
• Pin interconnects available with straight
MM #7007 or right angle MM #5005
solder tails. See page 182 for details.
• Sockets are available with straight MM
#1304 or right angle MM #1305 solder
tails. See pages 148 & 149 for details.
• MM #1304 and MM #1305 receptacles
use Hi-Rel, 6-finger BeCu #47 contacts
rated at 4.5 amps. Receptacles accept
.030” diameter and .025” square pins.
See page 221 for details.
• Insulators are high temp. thermoplastic.
RoHS
2002/95/EC
Series 800, 801
Fig. 2
Fig. 1
Fig. 2
Ordering Information
Series 800...10-001
Straight Pin Header
800-XX-0_ _-10-001000
Specify # of pins
01-64
Series 800...20-001 Right Angle Pin Header
800-XX-0 _ _-20-001000
Specify # of pins
02-64
Fig. 3
Fig. 4
www.mill-max.com
For Electrical,
Mechanical & Enviromental
Data, See pg. 4
XX=Plating Code
See Below
For RoHS compliance
select plating code.
SPECIFY PLATING CODE XX=
10
90
Pin Plating
10μ” Au 200μ” Sn/Pb
Series 801...10-001
40
200μ” Sn
Straight Socket
Fig. 3
44 Plating _{801-XX-0 _ _-10-001000}
Non-Standard
Specify # of pins
01-50
Fig. 4
Series 801...20-001
Right Angle Socket
44 Plating
Non-Standard
801-XX-0 _ _-20-001000
Specify # of pins
01-50
For Electrical,
Mechanical & Enviromental
Data, See pg. 4
XX=Plating Code
See Below
For RoHS compliance
select plating code.
SPECIFY PLATING CODE XX= 1 3
91
93
99
41
43
44
Sleeve (Pin)
10µ” Au 200µ” Sn/Pb 200µ” Sn/Pb 200µ”Sn/Pb 200µ”Sn 200µ”Sn 200µ”Sn
Contact (Clip)
30µ” Au 10µ” Au 30µ” Au 200µ”Sn/Pb 10µ” Au 30µ” Au 200µ”Sn
81
516-922-6000