310-93-120-41-001000 Datasheet, PDF (1/1 Pages) Mill-Max Mfg. Corp. – SINGLE-IN-LINE SOCKETS .100” Grid Solder Tail Single Row

Fig. 1
Fig. 2
Fig. 3
SINGLE-IN-LINE SOCKETS
.100” Grid Solder Tail
Single Row
Series 310, 311, 315
• SIP sockets accept .015 - .025”
diameter pins and standard IC leads.
• Various solder tails available:
standard length, long for multi-layer
boards, very low and ultra low profile.
See Mill-Max #1001, 0134, 0501 or
1534 pins (See pages 132, 133, 136)
for details.
• Hi-Rel, 4-finger BeCu #12 & #30 contacts
are rated at 3 amps. See pages 218 for
details.
• Insulators are high temp. thermoplastic.
RoHS
2002/95/EC
Fig. 1
Fig. 2
Fig. 3
Fig. 4
Ordering Information
Series 310...001
Standard Solder Tail
310-XX-1_ _-41-001000
Specify # of pins
01-64
Series 311...001
Long Solder Tail
41 & 91 Platings
Non-Standard
311-XX-1_ _-41-001000
Specify # of pins
01-64
Series 315...001
Very Low Profile
41 & 91 Platings
Non-Standard
315-XX-1_ _-41-001000
Specify # of pins
01-64
Series 315...003
Ultra Low Profile
41 & 91 Platings
Non-Standard
315-XX-1_ _-41-003000
Specify # of pins
01-64
Fig. 4
www.mill-max.com
For Electrical,
Mechanical & Enviromental
Data, See pg. 4
XX=Plating Code
See Below
For RoHS compliance
select plating code.
SPECIFY PLATING CODE XX= 1 3
91
93
99
41
43
44
Sleeve (Pin)
10µ” Au 200µ” Sn/Pb 200µ” Sn/Pb 200µ”Sn/Pb 200µ”Sn 200µ”Sn 200µ”Sn
Contact (Clip)
30µ” Au 10µ” Au 30µ” Au 200µ”Sn/Pb 10µ” Au 30µ” Au 200µ”Sn
89
516-922-6000