310-47-102-41-001000 Datasheet, PDF (1/1 Pages) Mill-Max Mfg. Corp. – SERIES 310, 311, 315 • .100” GRID SOLDER TAIL • SINGLE ROW STRIPS

INTERCONNECTS
SERIES 310, 311, 315 • .100” GRID SOLDER TAIL •
SINGLE ROW STRIPS
.095
.015-.025
.010 * .018
.110
.146 _.165
.020 DIA.
.125
FIG. 1
.015-.025
.010 * .018
.103
.110 _{.150 .165}
.020 DIA.
.170
FIG. 2
.015-.025
.010 * .018
.096
.110 _{.151 .122}
.108
.030 DIA.
FIG. 3
.015-.022
.010 * .018
• SIP sockets accept .015 - .025” diameter pins
and standard IC leads
• Various solder tails available: standard length,
long for multi-layer boards, very low and ultra
low pro le. See Mill-Max #1001, #0134, #0501
or #1534 pins. See pages 161, 162 and 165
for details
• Hi-Rel, 4- nger BeCu #12 and #30 contact are
rated at 3 amps. See pages 252 and 253 for
details
• Insulators are high temperature thermoplastic,
suitable for all soldering operations
ORDERING INFORMATION
Series 310...001
Standard Solder Tail
FIG. 1
310 XX 1_ _ 41 001000
Specify number of pins
01-64
Series 311...001
Long Solder Tail
FIG. 2
311 XX 1_ _ 41 001000
O
Specify number of pins
01-64
FIG. 3
Series 315...001
Very Low Pro le
315 XX 1_ _ 41 001000
O
Specify number of pins
01-64
FIG. 4
Series 315...003
Ultra Low Pro le
315 XX 1_ _ 41 003000
O
Specify number of pins
01-64
.071
.030 DIA.
.071
.095
.155
.095
RoHS - 2
2011/65/EU
XX=Plating Code
See Below
For
Electrical, Mechanical
& Enviromental Data,
See page 264
FIG. 4
SPECIFY PLATING CODE XX= 11 13
91 93 99 41 43 44 47
Sleeve (Pin)
10 µ”Au 10 µ”Au 200µ”Sn/Pb 200µ”Sn/Pb 200µ”Sn/Pb 200 µ”Sn 200 µ”Sn 200 µ”Sn 200 µ”Sn
Contact (Clip)
10 µ”Au 30 µ”Au 10 µ”Au 30 µ”Au 100µ”Sn/Pb 10 µ”Au 30 µ”Au 100 µ”Sn Au Flash
O ^{41 & 91 Platings Non-Standard}
Mill-Max Mfg. Corp. • 190 Pine Hollow Road, P.O. Box 300, Oyster Bay, NY 11771 • 516-922-6000 • Fax: [phone] • www.mill-max.com