301 Datasheet, PDF (1/1 Pages) DB Lectro Inc – SCREW TYPE SERIES

INTERCONNECTS
2,54 Grid (0,46 dia.) Pins, Straight and Right Angle
Single Row
Number of Pins X 2,54
2,54
• Series 3XX are available with straight
and right angle solder tails.
2,54
2,54
0,46 DIA.
3,61
2,79 _3,61
Number of Pins
X 2,54
• Series 350 & 399...009 use MM #3404
and #5011 pins. See pages 179 & 181
for details.
• Series 301, 310 & 399...003 use MM
#0156, #1001 & #1103 receptacles. See
pages 136 & 137 for details.
0,46 DIA.
2,79
2,54
Fig. 1
• Receptacles use Hi-Rel, 4 finger #30
BeCu contact rated at 3 amps. See page
218 for details.
• Insulators are high temp. thermoplastic.
RoHS
2002/95/EC
Series 301, 310,
350, 399
3,99 2,79
1,27
0,61 DIA.
0,46 DIA.
4,5
Number of Pins
X 2,54
2,54
3,2
2,54
Fig. 2
0,38-0,64
0,25 0,46
Number of Pins
X 2,54
Fig. 1
Fig. 2
Ordering Information
Series 350...006
Straight Pin Header
350-XX-1_ _-00-006000
Specify # of pins
01-64
Series 399...009
Right Angle Pin Header
399-XX-1_ _-10-009000
Specify # of pins
02-64
2,41
0,51 DIA.
2,79 _{3,71 4,19}
3,18
2,54
Fig. 3
For Electrical,
Mechanical & Enviromental
Data, See pg. 4
XX=Plating Code
See Below
For RoHS compliance
select  plating code.
SPECIFY PLATING CODE XX=
10
90
Pin Plating
0,25μm Au 5,08μm Sn/Pb
Series 310...001
40
5,08μm Sn
Straight Socket
0,38-0,64
0,25 * 0,46
2,54
Number of Pins
X 2,54
2,36
0,51 DIA.
1,14 DIA.
2,79 _{3,71 4,14}
7,37
1,09
3,23
2,54
Fig. 3
Fig. 4
310-XX-1_ _-41-001000
Specify # of pins
01-64
Series 301...056 Socket w/ Retention Pegs
301-XX-1_ _-41-560000
Specify # of pins
01-64
Fig. 4
Series 399...003
Right Angle Socket
41, 91 & 99 Platings Non-Standard
2,39
3,66
2,79
Number of Pins
X 2,54
Fig. 5
399-XX-1_ _-10-003000
Specify # of pins
01-64
1,27
0,46 DIA.
5,59
2,54
Fig. 5
www.mill-max.com
For Electrical,
2,54
Mechanical & Enviromental
Data, See pg. 4
3,2
XX=Plating Code
See Below
For RoHS compliance
select  plating code.
SPECIFY PLATING CODE XX= 1 3 
91
93
99
41 43 44
Sleeve (Pin)
0,25µm Au 5,08µm Sn/Pb 5,08µm Sn/Pb 5,08µm Sn/Pb 5,08µm Sn 5,08µm Sn 5,08µm Sn
Contact (Clip)
0,76µm Au 0,25µm Au 0,76µm Au 5,08µm Sn/Pb 0,25µm Au 0,76µm Au 5,08µm Sn
73
 516-922-6000