2316-3-00-80-00-00-07-0 Datasheet, PDF (1/1 Pages) Mill-Max Mfg. Corp. – SOLDER TERMINAL TURRETS

MALE PCB PINS
SOLDER TERMINAL TURRETS
2110
2110-X-00-XX-00-00-07-0
Swage mount in .052 hole
Basic Part Board Length
Number Thickness V
2110-1 .031
.049
2110-2 .062
.082
2333
2333-X-00-XX-00-00-07-0
Press-fit & swage in .052 mounting hole
Basic Part Board Length
Number Thickness V
2333-1 .078 .103
2333-2 .062 .087
2333-3 .047 .072
2821
2821-X-00-XX-00-00-07-0
Swage mount in .125 hole
2316
2316-X-00-XX-00-00-07-0
Swage mount in .064 hole
Basic Part Board Length
Number Thickness V
2821-2 .062 .109
2821-3 .094 .141
2821-4 .125 .172
2533
2533-0-00-XX-00-00-07-0
Press-fit & swage in .052 mounting hole
For a .062 thick board
2101
2101-3-00-XX-00-00-07-0
Press-fit in .053 mounting hole
For a .062 to .094 thick board
.053 DIA.
.056 DIA.
KNURL
.063 DIA.
.038 DIA.
.053 DIA.
.130
.060 _.080
.035
.080 ^.135
2317
2317-X-00-XX-00-00-07-0
Swage mount in .064 hole
2708
2708-X-00-XX-00-00-07-0
Swage mount in .120 hole
Basic Part Board Length
Number Thickness V
2XXX-1 _{.031 .062}
2XXX-2 .062 .094
2XXX-3 .094 .125
2XXX-4 ^{.125 .156}
SPECIFICATIONS:
Pin Material: Brass Alloy 360, 1/2 Hard
( Swage pins are annealed )
Dimensions: Inches
Tolerances On: Lengths: ± .005
Diameters: ± .002
Angles: ± 2 °
RoHS - 2
2011/65/EU
ORDER CODE: XXXX - X - 00 - XX - 00 - 00 - 07 - 0
BASIC PART #
SPECIFY PIN FINISH:
01 200 ” TIN/LEAD OVER NICKEL
80 200 ” TIN OVER NICKEL (RoHS)
44 300 ” SILVER OVER COPPER (RoHS)
50 300 ” ELECTRO-SOLDER
(60/40 SnPb)
Mill-Max Mfg. Corp. • 190 Pine Hollow Road, P.O. Box 300, Oyster Bay, NY 11771 • 516-922-6000 • Fax: [phone] • www.mill-max.com