146N Datasheet, PDF (1/1 Pages) Mill-Max Mfg. Corp. – PIN RECEPTACLES for .022” - .034” diameter pins and .025” square pins

0291
PIN RECEPTACLES
for .022” - .034” diameter pins
S
ION
ACHI
PINS
and .025” square pins
0293
0287
0285
0291-0-15-XX-16-XX-10-0
Hex press-fit in .067 plated
thru hole
0284
0293-0-15-XX-16-XX-10-0
Press-fit in.067 mounting hole
8114
0287-0-15-XX-16-XX-10-0
Solder mount in .065 min. mounting hole
Also available on 8mm wide carrier
tape: 3,250 parts per 13” reel.
Order as: 0287-0-57-XX-16-XX-10-0
0407
0285-0-15-XX-16-XX-10-0
Solder mount in .065 min.
mounting hole
0415
0284-0-15-XX-16-XX-10-0
Solder mount in .070 min.
mounting hole
0303
8114-0-15-XX-16-XX-04-0
Press-fit from underside of pc board
into .065 mounting hole
0306
0407-0-15-XX-16-XX-04-0
Press-fit in .066 mounting hole
0415-0-15-XX-16-XX-10-0
Solder mount in .063 min. mounting hole
Also available on 24mm wide carrier
tape: 1,500 parts per 13” reel.
Order as: 0415-0-57-XX-16-XX-10-0
0273
7520
0303-0-19-XX-16-XX-10-0
Press-fit in .067 mounting hole
Wire Crimp Termination. Accepts wire
sizes 26 AWG Max. / 30 AWG Min.
0306-0-19-XX-16-XX-10-0
Wire Crimp Termination. Accepts wire
sizes 20 AWG Max. / 24 AWG Min.
0273-0-15-XX-16-XX-10-0
Press-fit in .078 mounting hole
7520-0-15-XX-16-XX-10-0
Press-fit in .066 mounting hole
SPECIFICATIONS ^{ORDER CODE: XXXX - X - 1X - XX - 16 - XX - XX - 0}
SHELL MATERIAL:
Brass Alloy 360, 1/2 Hard
CONTACT MATERIAL:
Beryllium Copper Alloy 172, HT
DIMENSION IN INCHES
TOLERANCES ON:
LENGTHS: ±.005
DIAMETERS: ±.002
ANGLES:
± 2°
BASIC PART #
SPECIFY SHELL FINISH:
01 200μ” TIN/LEAD OVER NICKEL
 80 200μ” TIN OVER NICKEL (RoHS)
 15 10μ” GOLD OVER NICKEL (RoHS)
SPECIFY CONTACT FINISH:
01 200μ” TIN/LEAD OVER NICKEL
 80 200μ” TIN OVER NICKEL (RoHS)
 27 30μ” GOLD OVER NICKEL (RoHS)
RoHS
2002/95/EC
CONTACT
#16 CONTACT (DATA ON PAGE 222)
www.mill-max.com
146
 516-922-6000