146M Datasheet, PDF (1/1 Pages) Mill-Max Mfg. Corp. – PIN RECEPTACLES

0291
PIN RECEPTACLES
for 0,56 - 0,86 diameter pins
and 0,64 square pins
0293
0287
S
ION
ACHI
PINS
0285
2,01 DIA.
1,55 DIA.
1,8 DIA.
0,46
0,38
2,11
1,27
3,05 _3,68
2,18 DIA.
1,78 DIA.
KNURL
1,55 DIA.
0,38
0,71
1,52 2,31
4,32
5,08
2,03 DIA.
1,57 DIA.
1,3 DIA.
HOLE
1,14
2,11 _2,29
2,03 DIA.
1,57 DIA.
1,3 DIA.
HOLE
2,18 2,29
2,29
0291-0-15-XX-16-XX-10-0
Hex press-fit in 1,7 plated
thru hole
0284
0293-0-15-XX-16-XX-10-0
Press-fit in 1,7 mounting hole
8114
0287-0-15-XX-16-XX-10-0
Solder mount in 1,65 min. mounting hole
Also available on 8mm wide carrier
tape: 3,250 parts per 330mm reel.
Order as: 0287-0-57-XX-16-XX-10-0
0407
0285-0-15-XX-16-XX-10-0
Solder mount in 1,65 min.
mounting hole
0415
3,18 DIA.
1,73 DIA.
2,62
2,67
1,63 DIA.
1,73 DIA.
1,6 DIA.
5,33
3,68
0,51 DIA.
1,65 _2,11
3,81 _4,32
2,18 DIA.
1,75 DIA.
1,52 DIA.
5,08
0,51 DIA.
0,79
0,71 2,49
5,59
1,98 DIA.
13,72
1,52 DIA.
4,06
0,46
2,11
4,19
4,83
0284-0-15-XX-16-XX-10-0
Solder mount in 1,78 min.
mounting hole
0303
8114-0-15-XX-16-XX-04-0
Press-fit from underside of pc board
into 1,65 mounting hole
0306
0407-0-15-XX-16-XX-04-0
Press-fit in 1,68 mounting hole
0273
0415-0-15-XX-16-XX-10-0
Solder mount in 1,6 min. mounting hole
Also available on 24mm wide carrier
tape: 1,500 parts per 330mm reel.
Order as: 0415-0-57-XX-16-XX-10-0
7520
2,16 DIA.
1,75 DIA.
0,79
0,71 ^2,11
3,56
1,91 DIA.
MAX.
2,11
7,11
9,96
1,57 DIA.
0,74 DIA.
HOLE
8,94
3,81
1,83 DIA.
1,4 DIA.
1,7 DIA.
1,3 DIA.
HOLE
0,64
5,59 ^6,3
0303-0-19-XX-16-XX-10-0
Press-fit in 1,70 mounting hole
Wire Crimp Termination. Accepts wire
sizes 26 AWG Max. / 30 AWG Min.
0306-0-19-XX-16-XX-10-0
Wire Crimp Termination. Accepts wire
sizes 20 AWG Max. / 24 AWG Min.
2,49 DIA.
2,06 DIA.
1,85 DIA.
1,3 DIA.
HOLE
0,38
0,71 _2,11
5,33
2,18 DIA.
1,75 DIA.
1,57 DIA.
0,76 DIA.
1,57 DIA.
0,79
1,52
2,62
3,73
4,47
0,51
1,52
0273-0-15-XX-16-XX-10-0 7520-0-15-XX-16-XX-10-0
Press-fit in 1,98 mounting hole
Press-fit in 1,68 mounting hole
SPECIFICATIONS ^{ORDER CODE: XXXX - X - 1X - XX - 16 - XX - XX - 0}
SHELL MATERIAL:
Brass Alloy 360, 1/2 Hard
CONTACT MATERIAL:
Beryllium Copper Alloy 172, HT
DIMENSION IN INCHES
TOLERANCES ON:
LENGTHS: ±0,13
DIAMETERS: ±0,05
ANGLES:
± 2°
BASIC PART #
SPECIFY SHELL FINISH:
01 5,08μm TIN/LEAD OVER NICKEL
 80 5,08μmTIN OVER NICKEL (RoHS)
 15 0,25μm GOLD OVER NICKEL (RoHS)
SPECIFY CONTACT FINISH:
01 5,08μm TIN/LEAD OVER NICKEL
 80 5,08μm TIN OVER NICKEL (RoHS)
 27 0,76μm GOLD OVER NICKEL (RoHS)
RoHS
2002/95/EC
CONTACT
#16 CONTACT (DATA ON PAGE 222)
www.mill-max.com
146
 516-922-6000