0905 Datasheet, PDF (1/1 Pages) Mill-Max Mfg. Corp. – SPRING-LOADED CONNECTORS Discrete Spring-Loaded Contacts

0900-0
SPRING-LOADED CONNECTORS
Discrete Spring-Loaded Contacts
S
ION
ACHI
PINS
0900-1⇒4
0905
Basic Part
Number
0900-1
0900-2
0900-3
0900-4
Length
A
.177
.197
.217
.236
0900-0-00-00-00-00-11-0
Short stroke, Surface mount
Lowest profile
0907-X
0900-X-00-00-00-00-11-0
Standard stroke, Surface mount
Low profile
0901
0905-0-00-00-00-00-11-0
Standard stroke, Surface mount
Highest Profile
0914
0922
Basic Part
Number
0907-0
0907-1
0907-2
0907-3
0907-4
0907-5
0907-6
0907-7
0907-8
0907-9
0907-X-15-20-75-14-11-0
Standard stroke, Surface mount
High profile
0906-0
Length
A
.255
.275
.295
.315
.335
.350
.370
.390
.410
.430
MID STROKE
MAX
STROKE
0901-0-00-00-00-00-11-0 0914-0-15-20-77-14-11-0
Standard stroke
Long stroke.
Solder mount in .027 min. mounting hole Solder mount in .027 min. mounting hole
0906-1⇒4
MID
STROKE
MAX
STROKE
Basic Part
Number
0906-1
0906-2
0906-3
0906-4
Length
A
.177
.197
.217
.236
0922-0-15-20-75-14-11-0 0906-0-15-20-76-14-11-0
Standard stroke
Short stroke
Solder mount in .027 min. mounting hole Solder mount in .018 min. mounting hole
0906-X-15-20-75-14-11-0
Standard stroke
Solder mount in .018 min. mounting hole
ORDER CODE: 09XX - X - 15 - 20 - 7X - 14 - 11 - 0
Spring Number
MATERIAL SPECIFICATIONS:
SLEEVE & PLUNGER MATERIAL: Copper Alloy
SPRING MATERIAL: Beryllium Copper
SLEEVE & PLUNGER FINISH: 20 μ" Gold over Nickel
SPRING FINISH: 10 μ" Gold over Nickel
DIMENSION IN INCHES:
TOLERANCES ON: LENGTHS: ±.006
DIAMETERS: ±.002
ANGLES: ± 2°
RoHS
2002/95/EC
MECHANICAL & ELECTRICAL SPECIFICATIONS:
DURABILITY: 1,000,000 cycles
CURRENT RATING: 2A continuous, 3A peak
CONTACT RESISTANCE: 20 mΩ max.
SPRING
NUMBER
Mid.
STROKE
Max.
STROKE
FORCE @ Initial Force
Mid. Stroke (Pre-load)
75
.0275
.055
60
25
76
.0195
.039
60
25
77
.045
.090
60
25
75, 76, 77 Springs are not Interchangeable
www.mill-max.com
15
516-922-6000