0295-0-15-01-06-27-10-0 Datasheet, PDF (1/1 Pages) Mill-Max Mfg. Corp. – CONTACT DATA Insertion / Extraction Force Graphs

CONTACT DATA
S
ION
ACHI
PINS
Insertion / Extraction Force Graphs
#35 CONTACT
100
#35 CONTACT
FOR .015-.026 DIAMETER PINS (δ=.008)
6-FINGER, GROUP C (see page 214)
INITIAL INSERTION FORCE
INSERTION FORCE 2nd CYCLE
EXTRACTION FORCE
CONTACT MATERIAL:
BERYLLIUM COPPER Alloy 172, Heat Treated
#43 CONTACT
FOR .015-.026 DIAMETER PINS (δ=.008)
6-FINGER, GROUP C (see page 214)
D
OPERATING RANGE
10
MATING PIN DIAMETER (inches)
The insertion/extraction/normal force characteristics above were derived using 30 microinch gold plated contact
and polished steel gauge pins having a bullet-shaped tip.
The curves represent typical average values; they are best used to compare the differences between similar size
contacts and to guide you in selecting one that is suitable for your application. Your results may vary, so for your
specification, we encourage you to obtain complimentary samples for your evaluation.
100
#43 CONTACT
INITIAL INSERTION FORCE
INSERTION FORCE 2nd CYCLE
EXTRACTION FORCE
10
CONTACT MATERIAL:
BERYLLIUM COPPER Alloy 172, Heat Treated
#15 CONTACT
FOR .020-.032 DIAMETER PINS (δ=.005)
6-FINGER, GROUP K (see page 214)
D
OPERATING RANGE
1
MATING PIN DIAMETER (inches)
The insertion/extraction/normal force characteristics above were derived using 30 microinch gold plated contact
and polished steel gauge pins having a bullet-shaped tip.
The curves represent typical average values; they are best used to compare the differences between similar size
contacts and to guide you in selecting one that is suitable for your application. Your results may vary, so for your
specification, we encourage you to obtain complimentary samples for your evaluation.
1000.0
#15 CONTACT
CONTACT MATERIAL:
BERYLLIUM COPPER Alloy 172, Heat Treated
www.mill-max.com
100.0
10.0
INITIAL INSERTION FORCE
INSERTION FORCE 2nd CYCLE
EXTRACTION FORCE
G
OPERATING RANGE
MATING PIN DIAMETER (inches)
The insertion/extraction/normal force characteristics above were derived using 30 microinch gold plated contact
and polished steel gauge pins having a bullet-shaped tip.
The curves represent typical average values; they are best used to compare the differences between similar size
contacts and to guide you in selecting one that is suitable for your application. Your results may vary, so for your
specification, we encourage you to obtain complimentary samples for your evaluation.
220
( 516-922-6000