0136-0-15-01-30-02-04-0 Datasheet, PDF (1/1 Pages) Mill-Max Mfg. Corp. – PIN RECEPTACLES

1005/1013/8898
PIN RECEPTACLES
for .015” - .025” diameter pins
0145/0146
Basic Part
Number
1005-0
1013-0
8898-0
Length
A
.138
.165
.224
S
ION
ACHI
PINS
Basic Part
Number
0145-0
0146-0
Length
A
.300
.410
XXXX-0-15-XX-3X-XX-04-0
Press-fit in .057 mounting hole
1/4 hard brass shell for auto-clinching
4378
NOTE: 8898 is not annealed &
not suitable for auto-clinching
0556
014X-0-15-XX-30-XX-04-0
Press-fit in .059 mounting hole
1103
9234
4378-0-15-XX-30-XX-10-0 0556-0-15-XX-30-XX-04-0
Press-fit in .057 mounting hole
Press-fit in .059 mounting hole
0136/37/38/39/41/48/52
1103-0-15-XX-30-XX-04-0
Press-fit in .057 mounting hole
0447
9234-0-15-XX-30-XX-10-0
Solder mount in .052 min.
mounting hole
5660
Basic Part
Number
0136-0
0137-0
0138-0
0139-0
0141-0
0148-0
0152-0
Length
A
1.215
.560
.210
.635
.700
.455
.410
01XX-0-15-XX-30-XX-04-0
Press-fit in .057 mounting hole
0447-0-15-XX-30-XX-04-0
Press-fit in .056 mounting hole
5660-0-15-XX-30-XX-10-0
Solder mount in .051 min.
mounting hole
SPECIFICATIONS ^{ORDER CODE: XXXX - X - 15 - XX - XX - XX - XX - 0}
SHELL MATERIAL:
Brass Alloy 360, 1/2 Hard
CONTACT MATERIAL:
Beryllium Copper Alloy 172, HT
DIMENSION IN INCHES
TOLERANCES ON:
LENGTHS: ±.005
DIAMETERS: ±.002
ANGLES:
± 2°
BASIC PART #
SPECIFY SHELL FINISH:
01 200μ” TIN/LEAD OVER NICKEL
 80 200μ” TIN OVER NICKEL (RoHS)
 15 10μ” GOLD OVER NICKEL (RoHS)
SPECIFY CONTACT FINISH:
02 100μ” TIN/LEAD OVER NICKEL
 84 100μ” TIN OVER NICKEL (RoHS)
 27 30μ” GOLD OVER NICKEL (RoHS)
RoHS
2002/95/EC
SELECT CONTACT
#30 or #32 CONTACT (DATA ON PAGE 219)
www.mill-max.com
137
 516-922-6000