|
MT2064 Datasheet, PDF (1/2 Pages) Microtune,Inc – RF SILICON AND SUBSYSTEMS SOLUTIONS FOR BROADBAND COMMUNICATIONS AND AUTOMOTIVE ELECTRONICS | |||
|
RF SILICON AND SUBSYSTEMS SOLUTIONS
FOR BROADBAND COMMUNICATIONS AND AUTOMOTIVE ELECTRONICS
MT2064 SINGLE-CHIP
BROADBAND TUNER
PRODUCT BRIEF
The MT2064 is a low-power 3.3V single-
chip broadband tuner with an integrated
IF variable-gain amplifier.
MT2064 Single-Chip Broadband Tuner
The MicroTuner⢠MT2064 is an
advanced, low-power single-chip
broadband tuner that has been
optimized for high-performance
cable modems and embedded
multimedia terminal adapter (E-MTA)
that require low composite distortion
and low noise under digital cable
environments.
The MT2064 is capable of
receiving frequencies in the 48 MHz
to 1 GHz range and of converting a
selected channel to a standard
intermediate frequency (IF) between
30 MHz and 60 MHz.
The MT2064âs low phase noise
makes it ideal for use in digital
applications such as video, voice
and high-speed data. Its dual-
conversion architecture, with no
requirement for tracking filters, yields
the desirable characteristics of
traditional cable television tuners:
controlled input impedance across
the entire input band, low in-band
emissions, and outstanding image
rejection.
In addition, the MT2064 provides
excellent in-band flatness as well as
very repeatable gain characteristics
across the complete reception band.
The MT2064âs low-power
consumption significantly conserves
current and can be effectively used
to extend the operation of battery-
powered E-MTA.
The MT2064 can be used in
conjunction with Microtuneâs
upstream amplifiers to create a
complete RF front end for bi-
directional cable modem
APPLICATIONS
⢠VoIP Telephony Modems
⢠Cable Modems
⢠PacketCable⢠E-MTA
FEATURES
⢠48 MHz to 1000 MHz input
frequency range
⢠3.3V power supply
⢠Single-ended RF input reduces
BOM by eliminating input balun
⢠Works seamlessly with all digital
demodulators
⢠Low power dual-conversion
architecture
⢠Minimal external components
⢠No tunable parts required
⢠Integrated IF variable gain
amplifier for direct connection to
digital demodulators
⢠Low phase noise for excellent
performance in QAM 64 and QAM
256 systems
⢠Software and hardware shutdown
modes
⢠Frequency synthesizers fully
programmable via serial-control
interface
⢠Fully integrated VCO circuitry
simplifies PCB layout
⢠General-purpose input/ output
(GPIO) controllable via serial-
control interface
⢠Intermediate frequency (IF) output
fully compatible with DOCSIS®
2.0, EuroDOCSIS⢠2.0
⢠Integrated temperature sensor
⢠Operates with a 16 MHz crystal
⢠Small 6 mm x 6 mm 40-pin Quad
Flat No-Lead (QFN) package
|
▷ |