DPAD10 Datasheet, PDF (1/1 Pages) Micross Components – a low leakage Monolithic Dual Pico-Amp Diode

DPAD10
LOW LEAKAGE
PICO-AMP DUAL DIODE
Linear Systems replaces discontinued Siliconix DPAD10
The DPAD10 is a low leakage Monolithic Dual Pico-Amp Diode
The DPAD10 extremely low-leakage monolithic dual
diode provides a superior alternative to conventional
diode technology when reverse current (leakage) must
be minimized. In addition the monolithic dual
construction allows excellent capacitance matching per
diode. The DPAD10 features a leakage current of -10
pA and is well suited for use in applications such as
input protection for operational amplifiers.
DPAD10 Benefits:
 Negligible Circuit Leakage Contribution
 Circuit “Transparent” Except to Shunt
High-Frequency Spikes
 Simplicity of Operation
DPAD10 Applications:
 Op Amp Input Protection
 Multiplexer Overvoltage Protection
FEATURES  
DIRECT  REPLACEMENT  FOR  SILICONIX  DPAD10  
HIGH  ON  ISOLATION  
EXCELLENT  CAPACITANCE  MATCHING  
ULTRALOW  LEAKAGE  
REVERSE  BREAKDOWN  VOLTAGE  
REVERSE  CAPACITANCE  
ABSOLUTE  MAXIMUM  RATINGS    
@  25°C  (unless  otherwise  noted)  
Maximum  Temperatures  
Storage  Temperature  
Operating  Junction  Temperature  
Maximum  Power  Dissipation  
Continuous  Power  Dissipation    
MAXIMUM  CURRENT
Forward  Current  (Note  1)  
 
20fA  
∆C_{R Â} â‰¤  0.5pF  
≤  10  pA  
BV_{R Â} â‰¥  -­‐45V  
C_rss  ≤  2.0pF  
-­‐65°C  to  +150°C  
-­‐55°C  to  +135°C  
500mW  
50mA  
 
DPAD10  ELECTRICAL  CHARACTERISTICS  @  25°C  (unless  otherwise  noted)
SYMBOL  
CHARACTERISTICS  
MIN.   TYP.  
BV_R  
Reverse  Breakdown  Voltage  
-­‐45  
-­‐-­‐  
V_F  
Forward  Voltage  
-­‐-­‐  
0.8  
C_rSS  
Total  Reverse  Capacitance  
-­‐-­‐  
-­‐-­‐  
|C_R1-­‐C_R2|  
Differential  Capacitance  (∆C_R)  
-­‐-­‐  
-­‐-­‐  
I_R  
Maximum  Reverse  Leakage  Current   -­‐-­‐  
-­‐-­‐  
MAX.  
-­‐-­‐  
1.5  
2.0  
0.5  
-­‐10  
UNITS  
V  
V  
pF  
pF  
pA  
CONDITIONS  
I_{R Â} =  -­‐1µA  
I_{F Â} =  1mA  
V_{R Â} =  -­‐5V,  f  =  1MHz  
V_{R1 Â} =    V_{R2 Â} =  -­‐5V,  f  =  1MHz  
V_{R Â} =  -­‐  20V  
Notes:
1. Absolute maximum ratings are limiting values above which DPAD10 serviceability may be impaired.
Available Packages:
DPAD10 in TO-72
DPAD10 available as bare die
Please contact Micross for full package and die dimensions
TO-72 (Bottom View)
Micross Components Europe
Tel: [phone]
Email: [e-mail]
Web: http://www.micross.com/distribution.com
Information furnished by Linear Integrated Systems and Micross Components is believed to be accurate and reliable. However, no responsibility is assumed for its use; nor for any infringement of patents or
other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of Linear Integrated Systems.
Micross Components Ltd, United Kingdom, Tel: [phone], Fax: [phone], Email: [e-mail] Web: www.micross.com/distribution.aspx