AS29F010 Datasheet, PDF (1/26 Pages) Alliance Semiconductor Corporation – 5V 128K x 8 CMOS FLASH EEPROM

FLASH
AS29F010
128K x 8 FLASH
UNIFORM SECTOR 5.0V FLASH MEMO-
PIN ASSIGNMENT
(Top View)
AVAILABLE AS MILITARY
SPECIFICATIONS
• MIL-STD-883
• SMD 5962-96690
FEATURES
• Single 5.0V ±10% power supply operation
• Low power consumption:
3 12 mA typical active read current
3 30 mA typical program/erase current
3 <1 μA typical standby current
• Flexible sector architecture
3 Eight 16Kbyte sectors
3 Any combination of sectors can be erased
3 Full chip erase
• Sector protection
3 Hardware-based feature that disables/reenables program
and erase operations in any combination of sectors
3 Sector protection/unprotection can be implemented
using standard PROM programming equipment
• Embedded Algorithms
3 Embedded Erase algorithm automatically pre-programs
and erases the chip or any combination of designated
sectors
3 Embedded Program algorithm automatically programs
and verifies data at specified address
• Erase Suspend/Resume
3 Supports reading data from a sector not being erased
• Minimum 1,000,000 Program/Erase Cycles per sector
guaranteed
• Compatible with JEDEC standards
3 Pinout and software compatible with single-power-
supply FLASH
3 Superior inadvertent write protection
• Data\ Polling and Toggle Bits
3 Provides a software method of detecting program or
erase cycle completion
32-PIN Ceramic DIP (CW)
32-pin Flatpack (F)
32-pin Lead Formed Flatpack (DCG)
NC 1
A16 2
A15 3
A12 4
A7 5
A6 6
A5 7
A4 8
A3 9
A2 10
A1 11
A0 12
DQ0 13
DQ1 14
DQ2 15
V_SS ¹⁶
32
31
V_CC
WE\
30 _NC
29 _A14
28 _A13
27 _A8
26 _A9
25 _A11
24 _OE\
23 _A10
22 _CE\
21 _DQ7
20 _DQ6
19 _DQ5
18 _DQ4
17 _DQ3
OPTIONS
• Timing
50ns
60ns
70ns
90ns
120ns
150ns
• Package
Ceramic DIP (600 mil)
Flatpack
Lead Formed Flatpack
Small Outline J-Lead
MARKING
-50
-60
-70
-90
-120
-150
CW
F
DCG
SOJ
For more products and information
please visit our web site at
www.micross.com
• Temperature
Industrial Temperature (-40°C to +85°C)
Military Temperature (-55°C to +125°C)
883C Processing (-55°C to +125°C)
QML Processing (-55°C to +125°C)
IT
XT
883C
Q
AS29F010
Rev. 2.6 11/10
Micross Components reserves the right to change products or specifications without notice.
1