JANTX1N5305-1 Datasheet, PDF (6/6 Pages) Microsemi Corporation – CURRENT REGULATOR DIODES

1N5283-1 thru 1N5314-1
PACKAGE DIMENSIONS
Symbol
BD
BL
LD
LL
LL ₁
Dimensions
Inch
Millimeters
Min Max Min Max
.060 .107 1.52 2.72
.120 .300 3.05 7.62
.018 .023 0.46 0.58
1.000 1.500 25.40 38.10
0.050
1.27
NOTES:
1. Dimensions are in inches.
2. Millimeters are given for general information only.
3. The minimum body diameter shall be maintained over .15 inch (3.81 mm) inch of body length.
4. The specified lead diameter applies in the zone between .050 inch (1.27 mm) and the end of the lead.
Outside of this zone the lead diameter shall not exceed LD.
5. Both leads shall be within the specified dimension.
6. See 3.3 for L and TL definitions.
7. In accordance with ASME Y14.5M, diameters are equivalent to Φx symbology.
T4-LDS-0159, Rev. 2 (111541)
©2011 Microsemi Corporation
Page 6 of 6