1N2804B_10 Datasheet, PDF (6/6 Pages) Microsemi Corporation – 50 WATT ZENER DIODES

6 Lake Street, Lawrence, MA 01841
1-800-446-1158 / [phone] / Fax: [phone]
Website: http: //www.microsemi.com
TECHNICAL DATA SHEET
50 WATT ZENER DIODES
Qualified per MIL-PRF-19500/114
PACKAGE DIMENSIONS
Ltr
CH
LD
CD
PS
PS₁
HT
LL
L₁
MHD
MHS
HR
HR₁
S₁
Dimensions
Inches
Millimeters
Min Max Min Max
.270 .380 6.86 9.65
.048 .053 0.97 1.35
.875
22.23
.420 .440 10.67 11.18
.205 .225 5.21 5.72
.060 .135 1.52 3.42
.312 .500 7.92 12.70
.050
1.27
.151 .165 3.84 4.09
1.177 1.197 29.90 30.40
.495 .525 12.57 13.34
.131 .188 3.33 4.78
.655 .675 16.64 17.15
Notes
3
3
NOTES:
1. Dimensions are in inches.
2. Milimeter equivalents are given for general information only.
3. These dimensions should be measured at points .050 inch (1.27mm) + .005 inch (0.13mm) -.000 inch (0.00mm) below
seating plane.
4. The seating plane of the header shall be flat within .001 (0.03mm) concave to .004 inch (0.10mm) convex .001 inch
(0.003mm) cocave to .006 inch (0.15mm) convex overall.
5. Pins 1 and 2 are internally connected with an internal jumper.
6. Devices wih B suffix have the anode internally connected to the case and devices with RB suffix (reverse polarity) have
the cathode internally connected to the case.
7. In accordance with ASME Y14.5M, diameters are equivalent to φx symbology.
FIGURE 1. Physical dimensions (similar to TO-3)
T4-LDS-0076 Rev. 2 (101151)
Page 6 of 6