UM9401F Datasheet, PDF (5/6 Pages) Microsemi Corporation – CERAMIC SURFACE MOUNT PIN DIODE

UM9401F
CERAMIC SURFACE MOUNT PIN DIODE
NOTES:
1. These dimensions will match the terminals and provide for additional solder fillets at the outboard ends at
Least as wide as the terminals themselves, assuming accuracy of placement within 0.005”
2. If the mounting method chosen requires use of an adhesive separate from the solder compound, a round
(or square) spot of cement should be centrally located.
Copyright  2005
Rev. 0, 2005-10-17
Microsemi
Page 5