English
Language : 

LX8587X-XX Datasheet, PDF (3/11 Pages) Microsemi Corporation – 3A Low Dropout Positive Regulators
LX8587x-xx
®
3A Low Dropout Positive Regulators
TM
PRODUCTION DATA SHEET
ELECTRICAL CHARACTERISTICS
Unless otherwise specified, the following specifications apply over the operating ambient temperature for the LX8587x-xx with
0°C ≤ TA ≤ 125°C. Test conditions: VIN -VOUT = 3V; IOUT = 3A. Low duty cycle pulse testing techniques are used which maintains
junction and case temperatures equal to the ambient temperature.
Parameter
` LX8587-00/87A-00 (ADJUSTABLE)
Reference Voltage
Line Regulation (Note 2)
Load Regulation (Note 2)
Thermal Regulation
Ripple Rejection (Note 3)
Adjust Pin Current
Adjust Pin Current Change
Dropout Voltage LX8587-00
LX8587A-00
Minimum Load Current
Maximum Output Current
Temperature Stability
Long Term Stability (Note 3)
RMS Output Noise (% of VOUT)
(Note 3)
` LX8587-15/87A-15 (1.5V FIXED)
Output Voltage
Line Regulation (note 2)
Load Regulation (note 2)
Thermal Regulation (note 3)
Ripple Rejection (note 3)
Quiescent Current
Dropout Voltage
LX8587-15
LX8587A-15
Symbol
Test Conditions
VREF
Δ VREF
(VIN)
Δ VREF
(IOUT)
ΔVOUT
(Pwr)
IADJ
ΔIADJ
ΔV
IOUT(MIN)
IOUT(MAX)
ΔVOUT(T)
ΔVOUT(t)
IOUT = 10mA, TA = 25°C
10mA < IOUT < 3A, 1.5V < (VIN – VOUT), VIN <7V,
P < PMAX
IOUT = 10mA, 1.5V < (VIN – VOUT), VIN < 7V
VIN – VOUT = 3V, 10mA < IOUT < 3A
TA = 25°C, 20ms pulse
VOUT = 3.3V, f= 120Hz, COUT = 100µF Tantalum,
VIN = 5V, CADJ = 10µF, IOUT = 3A
10mA < IOUT < 3A, 1.5V < (VIN -VOUT), VIN < 7V
ΔVREF = 1%, IOUT = 3A
ΔVREF = 1%, IOUT = 3A
VIN < 7V
1.4V < (VIN - VOUT), VIN < 7V
TA = 125°C, 1000 hours
ΔVOUT(RMS) TA = 25°C, 10Hz < f < 10kHz
VOUT
ΔVOUT
(VIN)
ΔVOUT
(IOUT)
ΔVOUT
(Pwr)
IQ
ΔV
VIN = 5V, IOUT = 0mA, TA = 25°C
3.0V < VIN < 7V, 0mA < IOUT < 3A, P < PMAX
4.75V < VIN < 7V
4.75V < VIN < 10V
VIN = 5V, 0mA < IOUT < IOUT(MAX)
TA = 25°C, 20ms pulse
COUT = 100µF (Tantalum), IOUT = 3A
0mA < IOUT < IOUT(MAX), 4.75V < VIN < 10V
ΔVOUT = 1%, IOUT < IOUT(MAX)
ΔVOUT = 1%, IOUT < IOUT(MAX)
LX8587x-xx
Units
Min Typ Max
1.238 1.250 1.262 V
1.225 1.250 1.275 V
0.035 0.20
%
0.1
0.5
%
0.01 0.02 % / W
65
83
dB
55
100
µA
0.2
5
µA
1.1
1.3
V
1
1.2
V
2
10
mA
3
5
A
0.25
%
1
%
0.003
%
1.485
1.470
60
1.50
1.50
1
2
5
0.01
75
4
1.1
1
1.515 V
1.530 V
6
mV
10
mV
7.5
mV
0.02 % / W
dB
10
mA
1.3
V
1.2
V
Copyright © 2000
Rev. 2.0a, 2005-10-25
Microsemi
Integrated Products
11861 Western Avenue, Garden Grove, CA. 92841, 714-898-8121, Fax: 714-893-2570
Page 3