1N2982BJAN Datasheet, PDF (3/8 Pages) Microsemi Corporation – 10 Watt Zener Diodes Qualified per MIL-PRF-19500/124

1N2970B – 1N3015B and
1N3993A – 1N3998A
Symbol
I ZT
IR
I ZM
VF
VR
VZ
ZZT or ZZK
SYMBOLS & DEFINITIONS
Definition
Regulator Current: The dc regulator current (IZ), at a specified test point (IZT), near breakdown knee (IZK).
Reverse Current: The maximum reverse (leakage) current that will flow at the specified voltage and temperature.
Maximum Regulator (Zener) Current: The maximum rated dc current for the specified power rating.
Maximum Forward Voltage: The maximum forward voltage the device will exhibit at a specified current.
Reverse Voltage: The reverse voltage dc value, no alternating component.
Zener Voltage: The Zener voltage the device will exhibit at a specified current (IZ) in its breakdown region.
Dynamic Impedance: The small signal impedance of the diode when biased to operate in its breakdown region at a
specified rms current modulation (typically 10% of IZT or IZK) and superimposed on IZT or IZK respectively.
T4-LDS-0075, Rev. 3 (5/24/13)
©2013 Microsemi Corporation
Page 3 of 8