SG7900 Datasheet, PDF (2/7 Pages) Microsemi Corporation – negative fixed voltage regulators

SG7900A/SG7900 SERIES
NEGATIVE REGULATOR
ABSOLUTE MAXIMUM RATINGS (Note 1)
Device
Output Voltage
-5V
-12V
-15V
Input Voltage
-35V
-35V
-40V
Input Voltage Differential
(Output shorted to ground)
35V
35V
35V
Operating Junction Temperature
Hermetic (K, T, IG & L - Packages) ........................
Note 1. Values beyond which damage may occur.
150°C
THERMAL DATA
K Package:
Thermal Resistance-Junction to Case, θ_JC ................. 3.0°C/W
Thermal Resistance-Junction to Ambient, θ_JA ............... 35°C/W
T Package:
Thermal Resistance-Junction to Case, θ_JC .................. 15°C/W
Thermal Resistance-Junction to Ambient, θ_JA ............ 120°C/W
IG Package:
Thermal Resistance-Junction to Case, θ_JC ................. 3.5°C/W
Thermal Resistance-Junction to Ambient, θ_JA .............. 42°C/W
L Package:
Thermal Resistance-Junction to Case, θ_JC .................. 35°C/W
Thermal Resistance-Junction to Ambient, θ_JA ............ 120°C/W
Storage Temperature Range .......................... -65°C to 150°C
Lead Temperature (Soldering, 10 Seconds) ................. 300°C
Note A. Junction Temperature Calculation: T_J = T_A + (P_D x θ_JA).
Note B. The above numbers forθ_JC are maximums for the limiting thermal
resistance of the package in a standard mounting configuration.
The θ_JA numbers are meant to be guidelines for the thermal
performance of the device/pc-board system. All of the above
assume no ambient airflow.
RECOMMENDED OPERATING CONDITIONS (Note 2)
Operating Junction Temperature Range:
SG7900A/7900 ............................................. -55°C to 150°C
Note 2. Range over which the device is functional.
CHARACTERISTIC CURVES
FIGURE 1.
MAXIMUM AVERAGE POWER DISSIPATION
FIGURE 2.
QUIESCENT CURRENT VS. LOAD
FIGURE 3.
TEMPERATURE COEFFICIENT
05/01 Rev 1.5
Copyright  1999
LINFINITY Microelectronics Inc.
11861 Western Avenue ∞ Garden Grove, CA 92841
2
[phone] ∞FAX: [phone]