MDU1420 Datasheet, PDF (2/2 Pages) Microsemi Corporation – PLANAR TRANSCEIVERS

PLANAR TRANSCEIVERS
TM
®
MDU1420 Series
Operation
The basic principle of operation consists of detecting the frequency shift between a transmitted and a
received signal reflected back from a moving object within the field of view of the unit.
The unit produces a low level IF output signal which can be amplified and processed to provide an
audible or visual alarm signal and employs low cost surface mount manufacturing techniques which
are field proven as being rugged and reliable.
Electrical Characteristics
Transmitter
Frequency
: see table
Frequency Setting Accuracy : 3MHz
Power Output (Min.)
: 13dBm
EIRP
Operating Voltage
: +5V
±0.25V
Operating Current (CW)
: 60mA max.
: 45mA typ.
Harmonic Emissions
: < -7.3dBm
Pulse Mode Operation
Average Current (5% DC)
Width (Min.)
Cycle (Min.)
: 2mA typ. Pulse
: 5µSec Duty
: 1%
Receiver
Sensitivity (10dB S/N ratio)
3Hz to 80Hz bandwidth)
: -86dBm Noise
: 10µV (Both in
Antenna
Gain
-3dB Beamwidth
H Plane
E Plane
: 8dBi
:36deg
:72deg
Mechanical Characteristics
Weight
: 9grams
Tab Connections
: 0.1” spacing
Environmental Characteristics
Power/Temp. Coefficient
(over operating temp. range) : 3dB
Frequency/Temp. Coefficient
(over operating temp. range) : 6.5MHz Operating
Temperature :
-10ºC to +55ºC Storage
Temperature :
-30ºC to +70ºC
NOTES
Detection range is dependent on size and reflectivity of target and
S/N ratio Doppler shift at 10.525GHz is 31Hz/m.p.h. Unit functions
over -30ºC to +70ºC but performance may be degraded above
+55C.
Outline Drawing
Model
Application
MDU1420 USA,CANADA, ETC
Order Code
C910605
C910603
C910606
Frequency
10.515GHz
10.525Ghz
10.535GHz
Comments
USA FCC Part 15 Indoors
Copyright  2008
Rev: 2009-02-10
Microsemi
Microwave Products
75 Technology Drive, Lowell, MA. 01851, 978-442-5600, Fax: [phone]
Page 2