JAN1N5554 Datasheet, PDF (2/6 Pages) Microsemi Corporation – VOIDLESS HERMETICALLY SEALED STANDARD RECOVERY GLASS RECTIFIERS

1N5550 thru 1N5554
MAXIMUM RATINGS
Notes: 1. At .375 inch (9.52 mm) lead length from body.
2. Derate linearly at 22.2 mA/ºC from +55 ºC to +100 ^oC.
3. These I_O ratings are for a thermally (PC boards or other) mounting methods where the lead or end-cap temperatures cannot be maintained
and where thermal resistance from mounting point to ambient is still sufficiently controlled where T _J(MAX) does not exceed 175 ^oC. This
equates to R _θJX ≤ 47 ºC/W.
4. Derate linearly at 26.7 mA/°C above T _A= +100 °C to +175 °C ambient.
MECHANICAL and PACKAGING
• CASE: Hermetically sealed voidless hard glass with tungsten slugs.
• TERMINALS: Axial-leads are tin/lead (Sn/Pb) over copper. RoHS compliant matte-tin is available for commercial only.
• MARKING: Body paint and part number.
• POLARITY: Cathode band.
• TAPE & REEL option: Standard per EIA-296. Consult factory for quantities.
• WEIGHT: 750 milligrams.
• See Package Dimensions on last page.
Reliability Level
JAN = JAN Level
JANTX = JANTX Level
JANTXV = JANTXV Level
JANS = JANS Level
Blank = commercial
JEDEC type number
See Electrical Characteristics
table
PART NOMENCLATURE
JAN 1N5550 (e3)
RoHS Compliance
e3 = RoHS compliant (available
on commercial grade only)
Blank = non-RoHS compliant
Symbol
V _BR
V _RWM
I_O
V_F
I_R
t _rr
SYMBOLS & DEFINITIONS
Definition
Minimum Breakdown Voltage: The minimum voltage the device will exhibit at a specified current.
Working Peak Reverse Voltage: The maximum peak voltage that can be applied over the operating temperature range
excluding all transient voltages (ref JESD282-B).
Average Rectified Output Current: The Output Current averaged over a full cycle with a 50 Hz or 60 Hz sine-wave
input and a 180 degree conduction angle.
Maximum Forward Voltage: The maximum forward voltage the device will exhibit at a specified current.
Maximum Reverse Current: The maximum reverse (leakage) current that will flow at the specified voltage and
temperature.
Reverse Recovery Time: The time interval between the instant the current passes through zero when changing from
the forward direction to the reverse direction and a specified decay point after a peak reverse current occurs.
T4-LDS-0230, Rev. 1 (111901)
©2011 Microsemi Corporation
Page 2 of 6