APT34F60B_09 Datasheet, PDF (2/4 Pages) Microsemi Corporation – N-Channel FREDFET

Static Characteristics
T_J = 25°C unless otherwise specified
Symbol Parameter
Test Conditions
Min
V_BR(DSS)
ΔV_BR(DSS)/ΔT_J
R_DS(on)
V_GS(th)
ΔV_GS(th)/ΔT_J
Drain-Source Breakdown Voltage
Breakdown Voltage Temperature Coefficient
Drain-Source On Resistance ³
Gate-Source Threshold Voltage
Threshold Voltage Temperature Coefficient
V_GS = 0V, I_D = 250µA
Reference to 25°C, I_D = 250µA
V_GS = 10V, I_D = 17A
V_GS = V_DS, I_D = 1mA
600
2.5
I_DSS
Zero Gate Voltage Drain Current
V_DS = 600V
V_GS = 0V
T_J = 25°C
T_J = 125°C
I_GSS
Gate-Source Leakage Current
V_GS = ±30V
APT34F60B_S
Typ Max Unit
V
0.57
V/°C
0.15 0.19
Ω
4
5
V
-10
mV/°C
100
µA
500
±100 nA
Dynamic Characteristics
Symbol
g_fs
C_iss
C_rss
C_oss
Parameter
Forward Transconductance
Input Capacitance
Reverse Transfer Capacitance
Output Capacitance
T_J = 25°C unless otherwise specified
Test Conditions
Min
V_DS = 50V, I_D = 17A
V_GS = 0V, V_DS = 25V
f = 1MHz
C_o(cr) ⁴
C_o(er) ⁵
Effective Output Capacitance, Charge Related
Effective Output Capacitance, Energy Related
V_GS = 0V, V_DS = 0V to 400V
Q_g
Q_gs
Q_gd
t_d(on)
t_r
t_d(off)
t_f
Total Gate Charge
Gate-Source Charge
Gate-Drain Charge
Turn-On Delay Time
Current Rise Time
Turn-Off Delay Time
Current Fall Time
V_GS = 0 to 10V, I_D = 17A,
V_DS = 300V
Resistive Switching
V_DD = 400V, I_D = 17A
R_G = 4.7Ω ⁶ , V_GG = 15V
Typ
32
6640
70
610
325
170
165
36
70
37
43
115
34
Max
Unit
S
pF
nC
ns
Source-Drain Diode Characteristics
Symbol Parameter
I_S
Continuous Source Current
(Body Diode)
I_SM
Pulsed Source Current
(Body Diode) ¹
V_SD
Diode Forward Voltage
t_rr
Reverse Recovery Time
Q_rr
Reverse Recovery Charge
I_rrm
Reverse Recovery Current
dv/dt
Peak Recovery dv/dt
Test Conditions
MOSFET symbol
showing the
integral reverse p-n
junction diode
(body diode)
D
G
S
I_SD = 17A, T_J = 25°C, V_GS = 0V
T_J = 25°C
I_SD = 17A ³
di_SD/dt = 100A/µs
T_J = 125°C
T_J = 25°C
T_J = 125°C
T_J = 25°C
T_J = 125°C
I_SD ≤ 17A, di/dt ≤1000A/µs, V_DD = 400V,
T_J = 125°C
Min
Typ Max Unit
36
A
124
1.0
V
250
ns
525
10
µC
25
9
A
12
20 V/ns
1 Repetitive Rating: Pulse width and case temperature limited by maximum junction temperature.
2 Starting at T_J = 25°C, L = 6.44mH, R_G = 25Ω, I_AS = 17A.
3 Pulse test: Pulse Width < 380µs, duty cycle < 2%.
4 C_o(cr) is defined as a fixed capacitance with the same stored charge as C_OSS with V_DS = 67% of V_(BR)DSS.
5 C_o(er) is defined as a fixed capacitance with the same stored energy as C_OSS with V_DS = 67% of V_(BR)DSS. To calculate C_o(er) for any value of
V_DS less than V_(BR)DSS, use this equation: C_o(er) = -8.03E-8/V_DS^2 + 2.80E-8/V_DS + 9.89E-11.
6 R_G is external gate resistance, not including internal gate resistance or gate driver impedance. (MIC4452)
Microsemi reserves the right to change, without notice, the specifications and information contained herein.